Mazda Demio Model 2017 Lower Control Arm

(0 Reviews) Write a review
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm (Note: Certain unbracketed aftermarket replacements indicate up to 422 mm across extended geometric points). [1]
  • Total Component Height: 82 mm [1]
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Some heavy-duty premium replacement matrices specify a 17.5 mm cone variant; standard factory factory-fitted OE measures 16 mm). [1]
  • Fitting Configuration Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-350B, DA6A-34-350C, DA7H-34-350
    • Major Aftermarket Match: Delphi TC3286 [1, 2]

  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-300B, D23H-34-300, DA6A-34-300C
    • Major Aftermarket Match: Delphi TC3287 [1, 2]

3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer.
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (DBA-DJ3FS, DBA-DJ3AS 4WD, DJ5FS, DJ5AS).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership). [1, 2]

KSh5,500.00

In stock
Buy now

Description

Product Overview

The Front Lower Control Arm is a vital structural component of the Mazda Demio’s independent MacPherson strut front suspension. It serves as the primary lower pivoting link connecting the front wheel hub and steering knuckle to the vehicle’s subframe. Supplied as a complete, ready-to-install unit, it comes pre-assembled with the outer ball joint and inner rubber control arm bushings, ensuring a direct, bolt-on replacement without the need to press individual components.

Key Technical Specifications

(Standard specifications for the 2017 Mazda Demio DJ generation front lower control arm):

  • Fitting Position: Front Axle (Available separately for Left Hand / Passenger Side and Right Hand / Driver Side)

  • Design Type: Stamped-steel A-arm / wishbone construction

  • Included Components:

    • 1 x High-Strength Stamped Steel Control Arm Body

    • 1 x Pre-pressed Outer Ball Joint

    • 2 x Pre-installed Inner Rubber Control Arm Bushings (Chassis mount points)

  • Compatibility: Fully compatible with DJ-series Mazda Demio / Mazda2 models (incorporating Skyactiv-G petrol and Skyactiv-D diesel trims).

Material & Build Quality

  • Material Composition: Engineered from heavy-gauge stamped sheet steel to withstand intense vertical road impacts, sharp cornering lateral forces, and heavy braking stress without flexing.

  • Surface Protection: Treated with a durable black electrophoretic or powder-coated finish to safeguard against rust, moisture damage, road salt, and debris.

  • Bushings & Joints: High-durometer rubber bushings are optimized to maintain Mazda’s signature crisp, responsive steering response while effectively damping out road harshness. The ball joint features a heavy-duty rubber dust boot to seal out dirt and retain internal lubrication.

OEM & Cross-Reference Part Numbers

  • Mazda OEM Part Numbers:

    • Front Lower Control Arm (Right / RH): DFY1-34-300 / DFY1-34-350 (regional prefix variants apply)

    • Front Lower Control Arm (Left / LH): DFY1-34-350 / DFY1-34-300

  • Popular Aftermarket Brands: TRW, Febest, Moog, NTY, and Japanparts.

Common Signs of Worn Lower Arms

When the rubber bushings crack/tear or the ball joints develop play, a 2017 Mazda Demio will typically display these symptoms:

  1. Clunking or Knocking Sounds: Sharp metallic thuds when navigating speed bumps, potholes, or rough road surfaces.

  2. Steering Wandering: A loose or vague steering feel, forcing you to make frequent minor corrections to keep the car tracking straight on the highway.

  3. Uneven Front Tire Wear: Premature feathering or irregular wear on the inner or outer edges of the front tires due to shifting wheel alignment.

  4. Braking Vibration: A shudder or vibration felt through the steering wheel when applying the brakes.

Reviews

There are no reviews yet.

Be the first to review “Mazda Demio Model 2017 Lower Control Arm”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)