Nissan Cube Lower Arms

(0 Reviews) Write a review
1. Dimensional & Sizing Specifications
  • Ball Joint Cone/Pin Diameter:
    • Z11 Platform (2002–2008): Ø 16 mm [The Nissan Note Z11 shares this spec with the K12 Micra/E11 Note].
    • Z12 Platform (2008–2020): Ø 18 mm [Upgraded to match the C11 Tiida/NV200 standard for a wider wheel track].

  • Bushing Bolt Hole Diameters: 12 mm (Main subframe pivot alignment points)
  • Average Assembly Weight: ~2.25 kg to 2.40 kg per arm (dependent on platform width)
2. OEM Part Numbers & Cross-References
  • Z11 Generation (2002–2008 / B-Platform):
    • Left-Hand Side (LH): 54501-AX000, 54501-14B0A
    • Right-Hand Side (RH): 54500-AX000, 54500-14B0A
    • Aftermarket Matches: Delphi TC1307 (LH) / Delphi TC1308 (RH)

  • Z12 Generation (2008–2020 / B-Lounge Platform):
    • Left-Hand Side (LH): 54501-1FU0A, 54501-ED000, 54501-EE50A
    • Right-Hand Side (RH): 54500-1FU0A, 54500-ED000, 54500-ED00A
    • Aftermarket Matches: Delphi TC2873 (LH) / Delphi TC2874 (RH)

3. Material & Component Architecture
  • Structural Composition: Heavy-gauge stamped sheet steel matrix frame finished in an anti-corrosion black protective coating.
  • Pre-Installed Bushings: High-damping vulcanized natural rubber silent-block bushings (one small horizontal pivot bushing at the front position, one large vertical compliance cylindrical bushing at the rear position).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed and pre-greased low-friction ball joint integrated with a neoprene protective dust boot.
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Nissan Cube (BZ11, BNZ11, YZ11, Z12, NZ12).
  • Engine Alignment: 1.4L (CR14DE), 1.5L (HR15DE), 1.6L (HR16DE), 1.8L (MR18DE).
  • Platform Interchangeability:
    • Z11 arms directly swap with the Nissan March/Micra (K12) and Nissan Note (E11).
    • Z12 arms directly swap with the Nissan Tiida (C11), NV200 (M20), and Wingroad (Y12).

KSh4,000.00

In stock
Buy now

Description

Product Overview

The Front Lower Control Arm is a key structural component of the Nissan Cube’s independent front suspension system. It acts as the lower link connecting the front wheel hub/steering knuckle to the vehicle subframe. Each unit is supplied fully pre-assembled—featuring an integrated outer ball joint and rubber control arm bushings—allowing for a direct, bolt-on replacement without needing specialized press tools to service the bushings separately.

Key Technical Specifications

(Standard specifications for Nissan Cube Z12 front lower control arms):

  • Fitting Position: Front Axle (Available separately for Left Hand / Passenger Side and Right Hand / Driver Side)

  • Design Type: Stamped-steel A-arm / wishbone layout

  • Included Components:

    • 1 x Heavy-Duty Stamped Steel Control Arm Body

    • 1 x Pre-pressed Outer Ball Joint

    • 2 x Pre-installed Inner Rubber Control Arm Bushings

  • Platform Compatibility: Shares platform components with the Nissan Note E11 and Tiida C11 (ensuring reliable cross-compatibility in suspension geometry).

Material & Build Quality

  • Material Composition: Engineered from high-strength pressed sheet steel, designed to withstand vertical wheel impacts, cornering lateral forces, and heavy braking stress without flexing.

  • Corrosion Protection: Treated with a durable black anti-corrosion finish (electrophoretic coating) to prevent rust and degradation caused by road moisture, salt, and debris.

  • Bushings & Ball Joints: High-density rubber bushings provide a smooth, comfortable ride while absorbing road harshness. The ball joint features a robust protective dust boot to seal out dirt and retain internal lubrication.

OEM & Cross-Reference Part Numbers

  • Nissan OEM Part Numbers:

    • Front Lower Control Arm (Right / RH): 54500-ED00A, 54500-EL000 (and related platform variants)

    • Front Lower Control Arm (Left / LH): 54501-ED00A, 54501-EL000

  • Popular Aftermarket Brands: TRW, Delphi, Febest, Moog, and GSP.

Common Signs of Worn Lower Arms

When the rubber bushings crack, tear, or the ball joints develop looseness over time, a Nissan Cube will typically display these symptoms:

  1. Clunking or Knocking Noises: Sharp metallic thuds or knocking sounds heard when driving over speed bumps, potholes, or uneven city pavement.

  2. Steering Instability / Wandering: A loose or vague steering feel, causing the vehicle to wander on the highway and requiring constant minor tracking corrections.

  3. Uneven Tire Wear: Premature or irregular wear patterns on the inner or outer edges of the front tires due to shifting wheel alignment.

  4. Braking Vibration: A shudder or vibration felt through the steering wheel when applying the brakes.

Reviews

There are no reviews yet.

Be the first to review “Nissan Cube Lower Arms”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)