Nissan Note E11 Lower Arm Control

(0 Reviews) Write a review
Structural & Geometrical Specifications
  • Suspension Architecture: Front Axle Lower Wishbone / A-Arm assembly designed for MacPherson strut configurations.
  • Component Symmetry: Asymmetric design (Left-Hand and Right-Hand units are distinct and not interchangeable).
  • Material Matrix: Stamped high-tensile sheet steel with robotically welded structural reinforcements.
  • Surface Finish: Electrophoresis anti-rust black coating for corrosion resistance.
  • Component Weight: Approximately 2.3 kg to 2.5 kg per individual arm assembly (including pre-pressed bushings and ball joint).
  • Chassis Compatibility: Interchangeable across the Nissan B-platform including the Note E11, Tiida C11, Micra/March K12, and Cube Z11.
Integrated Hardware & Connection Specs
  • Ball Joint Configuration: Integrated press-fit lower ball joint with a heavy-duty rubber dust boot and grease retention clip.
  • Ball Joint Stud Pin Diameter: Standard Ø 18 mm tapered fitment.
  • Bushing Layout (Dual Silent-Block System):
    • Front Inner Bushing: Horizontal cylindrical steel-sleeved natural rubber bushing.
    • Rear Inner Bushing: Large vertical lip/flange-type bushing engineered to isolate cabin floor vibration.
    • Rubber Hardness: 60–65 Shore A durometer optimized for structural rigidity under braking and steering loads.

Genuine OEM & Aftermarket Part Numbers
  • Right Hand (RH – Front Lower Arm):
    • Nissan Genuine OEM: 54500-AX600, 54500-AX00A, 54500-9U00A, 54500-BC40A, 54500-ED00A
    • Aftermarket Identifiers: Febest (0224-K12RH), Blue Print (ADN186117), Delphi (TC1374)

  • Left Hand (LH – Front Lower Arm):
    • Nissan Genuine OEM: 54501-AX600, 54501-AX00A, 54501-9U00A, 54501-BC40A, 54501-ED00A
    • Aftermarket Identifiers: Febest (0224-K12LH), Blue Print (ADN186116), Delphi (TC1373)

KSh3,500.00

In stock
Buy now

Description

Product Description: Nissan Note / Tone (E11 Chassis, 2005–2012) Front Lower Control Arm Assembly (Wishbone)

Overview

The Front Lower Control Arm (Wishbone Assembly) for the Nissan Note / Tone (E11 / NE11 Chassis, 2005–2012 with 1.4L CR14DE, 1.5L HR15DE, 1.6L HR16DE, & 1.5L dCi K9K Engines) is a critical front suspension component designed to restore sharp steering response, front axle alignment, and cabin comfort. Positioned between the front steering knuckle and subframe, this pre-assembled control arm stabilizes the front wheels during acceleration, braking, and cornering, absorbing road impact energy before it transfers into the body frame.

Technical Specifications & Characteristics

  • Vehicle Compatibility: Nissan Note / Tone (E11 FWD / NE11 e-4WD, 2005–2012), Nissan Tiida / Latio (C11/SC11), and Nissan Wingroad (Y12)

  • Positions Available:

    • Front Right (RH / Driver Side): Lower position complete with integrated ball joint and rubber bushings.

    • Front Left (LH / Passenger Side): Lower position complete with integrated ball joint and rubber bushings.

  • Assembly Components: Reinforced stamped steel main arm body, pre-pressed front and rear noise-dampening rubber bushings, and a precision-ground lower ball joint with a sealed rubber dust boot.

  • Material & Protective Finish: High-strength structural steel coated with a rust-resistant, anti-corrosion electro-black finish for long-lasting performance in harsh road environments.

  • Installation Type: Direct OEM bolt-on replacement fitting straight into factory subframe crossmember mounts and lower wheel hub knuckle.

Key Features & Performance Benefits

  1. Restores Sharp Steering Feedback: Corrects front wheel alignment geometry, eliminating steering wheel play, drift, and highway wandering.

  2. Absorbs Harsh Road Impacts: High-density rubber-metal bushings cushion shocks from potholes, speed bumps, and gravel roads to maintain low cabin vibration.

  3. Protects Front Tire Tread: Eliminates excessive wheel wobble and misalignment, preventing uneven shoulder tread wear and frequent alignment corrections.

  4. Complete Ready-to-Install Assembly: Comes pre-fitted with both bushings and lower ball joint, allowing fast installation without requiring specialized hydraulic shop press tools.

Variant & Fitment Notes (Nissan B-Platform E11)

The E11 Note shares its platform architecture with the C11 Tiida and K12 March/Micra. When replacing, verify the lower ball joint stud pin diameter (commonly 18mm for standard E11 variants):

  • Front Right (RH) OEM Reference: 54500-AX600, 54500-ED50A, 54500-EE500, 54500-EL000, 54500-1FE0A

  • Front Left (LH) OEM Reference: 54501-AX600, 54501-ED50A, 54501-EE500, 54501-EL000, 54501-1FE0A

  • Popular Aftermarket Brands: 555 (Sankei Japan), CTR (Korea), Febest, Sidem, Blueprint, Moog, and Yamato.

Reviews

There are no reviews yet.

Be the first to review “Nissan Note E11 Lower Arm Control”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)