Toyota Allion 240 Lower Control Arms

(0 Reviews) Write a review
Toyota Allion 240 Series Lower Control Arm Technical Specifications

The front lower control arms for the first-generation Toyota Allion 240 series (chassis codes: NZT240, ZZT240, AZT240, ZZT245 [4WD], production range 2001–2007) utilize an L-shaped MacPherson strut lower wishbone architecture. This assembly structurally joins the front steering knuckle to the main engine crossmember subframe.
1. Core Part Identification & OEM Numbers

  • Right Hand (RH) Front Lower Control Arm:
    • 48068-20400 (Primary factory baseline number)
    • Interchangeable Structural Refs: 48068-02050, 48068-12220, 48068-0M010

  • Left Hand (LH) Front Lower Control Arm:
    • 48069-20400
    • Interchangeable Structural Refs: 48069-02050, 48069-12220, 48069-0M010

  • Component Weight: Approximately 3.39 kg per side (complete stamped assembly with bushings pressed).
2. Dimensional & Physical Parameters

  • Structural Frame Material: Stamped heavy-gauge cold-rolled carbon sheet steel.
  • Chassis Attachment Layout: 3-Point orientation (Inner forward horizontal bushing + Inner rear vertical trailing bushing + Outer steering knuckle ball joint receiver).
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Bolt Sleeve (Inner Diameter): 14.2 mm (Engineered for an M14 pivot bolt)
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.5 mm

  • Rear Large Bushing Outer Barrel Diameter (OD): 68.5 mm
  • Rear Large Bushing Metal Casing Height: 59.2 mm
3. Elastomeric Component & Bushing Specifications

  • Material Compound: High-durometer vulcanized natural rubber (NR) bonded to carbon steel inner and outer sleeves.
  • Bushing Sub-Components (For Independent Pressing/Rebuilds):
    • Small Front Bushing Ref: 48654-12120 / RU-357 (Dimensions: 14.2mm ID × 39.0mm OD × 59.0mm Length)
    • Large Rear Bushing Ref: 48655-12170 / RU-385 / TAB-026 (Dimensions: 14.5mm ID × 68.5mm OD × 60.0mm Length)

4. Platform Cross-Compatibility

  • The T240 Allion lower control arm shares an identical structural chassis footprint and geometry with the Toyota Premio (T240), Toyota Wish (ANE10/ZNE10), Toyota Corolla (NZE121/ZZE122), and the Toyota Matrix/Voltz (ZZE130) platform variations of the same production era.

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Allion / Premio (NZT240, ZZT240, & AZT240 Chassis, 2001–2007) Front Lower Control Arms (Transverse Link Assemblies)

Overview

The Front Lower Control Arm Assemblies for the Toyota Allion & Toyota Premio (NZT240 1.5L 1NZ-FE, ZZT240 1.8L 1ZZ-FE, & AZT240 2.0L 1AZ-FSE D4, 240-Series 2WD Platform 2001–2007) are OEM-spec, heavy-duty front suspension arms engineered to restore precise steering tracking, eliminate front-end clunking, and stabilize wheel alignment. Serving as the primary structural link connecting the front steering knuckle to the engine subframe, each arm comes pre-assembled with durable rubber isolation bushings and a low-friction ball joint to deliver smooth ride comfort and responsive handling.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2001–2007 Toyota Allion & Toyota Premio (NZT240, ZZT240, AZT240, 2WD Models)

    • (Also cross-fits Toyota Wish ZNE10, Toyota Corolla Fielder/Axio NZE121/ZZE122, and Toyota Caldina AZT241).

  • Position: Front Axle Lower Suspension (Left Hand LH 48069-20390 / 48069-02060 & Right Hand RH 48068-20390 / 48068-02060 side-specific).

  • Assembly Components Included:

    1. Stamped Heavy-Gauge Steel Control Arm: High-tensile structural steel body with anti-corrosion e-coating.

    2. Front Hydro-Cushion / Pivot Bushing: Pre-pressed forward pivot bushing for vertical suspension articulation.

    3. Rear Large Compliance Bushing: Pre-pressed heavy-duty rear rubber bushing engineered to absorb road impact shocks and braking forces.

    4. Lower Ball Joint: Direct-fit bolt-on lower ball joint with induction-hardened stud and synthetic grease boot.

  • Material Construction: Stamped carbon steel body with high-durometer Natural Rubber (NR) bushings.

  • Fitment Type: Direct factory bolt-on unit using original subframe chassis bolts and steering knuckle pinch bolts.

Key Features & Performance Benefits

  1. Eliminates Front End Clunking & Knocking: Replaces torn, cracked, or fluid-leaking rubber bushings and loose ball joints, curing clunking sounds over speed bumps and rough road surfaces.

  2. Restores Precise Steering Response & Alignment: Eliminates arm deflection under cornering and braking, keeping camber and toe angles locked in to prevent uneven, accelerated tire edge wear.

  3. Absorbs Road Shocks & Cabin Harshness: High-quality rubber compliance bushings filter out road harshness and vibration before it transmits into the unibody and steering wheel.

  4. Complete Pre-Assembled Units: Comes fully assembled with bushings and ball joint ready for installation, eliminating the need for hydraulic shop presses during replacement.

Variant & Fitment Notes (2WD NZT240/ZZT240 vs. 4WD NZT245/ZZT245)

Important: 2WD 240-Series Allion/Premio lower control arms feature standard subframe mounting dimensions and ball joint taper angles. 4WD models (NZT245 / ZZT245) feature distinct subframe offset profiles and modified ball joint mounting geometry:

  • 2WD Models (NZT240 / ZZT240 / AZT240) OEM Reference:

    • Front Right (RH): 48068-20390, 48068-02060, 48068-12240

    • Front Left (LH): 48069-20390, 48069-02060, 48069-12240

  • 4WD Models (NZT245 / ZZT245 – Reference Only):

    • Front Right (RH): 48068-20400, 48068-02070

    • Front Left (LH): 48069-20400, 48069-02070

  • Popular Aftermarket Brands: 555 (Sankei Japan), CTR (Korea), Febest, JIKIU, Yamato, RBI, and Tenacity.

Reviews

There are no reviews yet.

Be the first to review “Toyota Allion 240 Lower Control Arms”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)