Toyota Axio Model 2007-2012 Lower Control Arms

(0 Reviews) Write a review
Toyota Corolla Axio (2007–2012) Lower Control Arm Technical Specifications

The front lower control arms for the E140 generation Toyota Corolla Axio (chassis codes: NZE141, NZE144 [4WD], ZRE142, ZRE144 [4WD], production range 2007–2012) feature a conventional L-shaped MacPherson strut lower wishbone architecture. This assembly structurally joins the lower steering knuckle to the vehicle’s engine crossmember subframe.
1. Core Part Identification & OEM Numbers

  • Right Hand (RH) Front Lower Control Arm:
    • 48068-12300 (Primary factory baseline number)
    • Interchangeable Structural Refs: 48068-02140, 48068-12290, 48068-02160

  • Left Hand (LH) Front Lower Control Arm:
    • 48069-12300
    • Interchangeable Structural Refs: 48069-02140, 48069-12290, 48069-02160

  • Component Weight: Approximately 3.15 kg per side (complete stamped shell assembly with bushings pressed).
2. Dimensional & Physical Parameters

  • Structural Frame Material: Stamped heavy-gauge cold-rolled structural carbon steel plate.
  • Chassis Attachment Layout: 3-Point orientation (Inner forward horizontal bushing + Inner rear vertical trailing bushing + Outer steering knuckle ball joint receiver flange).
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Bolt Sleeve (Inner Diameter): 14.2 mm (Engineered to receive an M14 pivot bolt)
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.4 mm

  • Rear Large Bushing Outer Barrel Diameter (OD): 65.2 mm
  • Rear Large Bushing Metal Casing Height: 55.0 mm
3. Elastomeric Component & Bushing Specifications

  • Material Compound: High-durometer vulcanized natural rubber (NR) bonded inside carbon steel inner and outer backing sleeves.
  • Bushing Sub-Components (For Independent Pressing/Rebuilds):
    • Small Front Bushing Ref: 48654-12150 / RU-494 (Dimensions: 14.2mm ID × 38.2mm OD × 61.0mm Length)
    • Large Rear Bushing Ref: 48655-12120 / RU-495 / TAB-145 (Dimensions: 14.4mm ID × 65.2mm OD × 55.0mm Length)

4. Drivetrain & Platform Cross-Compatibility

  • 2WD vs. 4WD Architecture: 2WD models (NZE141, ZRE142) share identical base control arms. 4WD models (NZE144, ZRE144) utilize alternative rear bushing durometers to mitigate drivetrain twist from the transfer case, though the physical arm geometry remains interchangeable.
  • Platform Sharing: The E140 Axio lower control arm shares an identical structural chassis footprint with the Toyota Corolla Fielder (E140), Toyota Auris (E150), and Toyota Blade (E150) variations of the same production era.

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Corolla Axio / Fielder (NZE141, NZE144, ZRE142, & ZRE144 Chassis, 2007–2012) Front Lower Control Arms (Transverse Link Assemblies)

Overview

The Front Lower Control Arm Assemblies for the Toyota Corolla Axio Sedan & Corolla Fielder Wagon (NZE141 1.5L 1NZ-FE & ZRE142 1.8L 2ZR-FE / 2ZR-FAE, 140-Series Platform 2007–2012, 2WD & 4WD) are heavy-duty, factory-replacement front suspension arms engineered to restore sharp steering tracking, eliminate front-end clunking, and lock in front wheel alignment. Serving as the primary structural link connecting the front steering knuckle to the engine subframe, each arm comes pre-assembled with durable rubber isolation bushings and a low-friction ball joint to deliver OEM-level handling precision and ride comfort.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2007–2012 Toyota Corolla Axio Sedan & Corolla Fielder Wagon (NZE141, NZE144, ZRE142, ZRE144, 2WD & 4WD Models)

    • (Also cross-fits Toyota Allion/Premio NZT260/ZRT260, Toyota Wish ZGE20, Toyota Auris NZE151, and Toyota Corolla Rumion NZE151).

  • Position: Front Axle Lower Suspension (Left Hand LH 48069-12300 / 48069-02170 & Right Hand RH 48068-12300 / 48068-02170 side-specific).

  • Assembly Components Included:

    1. Stamped Heavy-Gauge Steel Control Arm: High-tensile structural steel body with corrosion-resistant e-coating finish.

    2. Front Hydro-Cushion / Pivot Bushing: Pre-pressed forward pivot bushing for smooth vertical suspension articulation.

    3. Rear Large Compliance Bushing: Pre-pressed heavy-duty rear rubber bushing engineered to absorb road impact shocks and heavy braking forces.

    4. Lower Ball Joint: Integrated/bolt-on lower ball joint with induction-hardened stud and synthetic grease boot.

  • Material Construction: Stamped structural carbon steel with high-durometer Natural Rubber (NR) bushings.

  • Fitment Type: Direct factory bolt-on unit using original subframe chassis bolts and steering knuckle pinch bolts.

Key Features & Performance Benefits

  1. Eliminates Front-End Clunking & Knocking: Replaces torn, cracked, or fluid-leaking rubber bushings and worn ball joints, curing clunking noises over speed bumps and rough road surfaces.

  2. Restores Precise Steering Response & Alignment: Eliminates unwanted arm deflection under cornering and braking, keeping camber and toe angles locked in to prevent uneven, premature tire edge wear.

  3. Absorbs Road Shocks & Cabin Harshness: High-grade rubber compliance bushings filter out road harshness and chassis vibration before it reaches the unibody and steering wheel.

  4. Complete Pre-Assembled Units: Comes fully assembled with bushings and ball joint ready for installation, eliminating the need for hydraulic shop presses during replacement.

Variant & Fitment Notes (2WD NZE141 / ZRE142 vs. 4WD NZE144 / ZRE144)

Important: 2WD 140-Series Axio/Fielder models feature standard subframe mounting dimensions and ball joint taper angles. 4WD models (NZE144 / ZRE144) utilize altered subframe mounting offsets and modified lower ball joint mounting geometry:

  • 2WD Models (NZE141 / ZRE142) OEM Reference:

    • Front Right (RH): 48068-12300, 48068-02170, 48068-12280

    • Front Left (LH): 48069-12300, 48069-02170, 48069-12280

  • 4WD Models (NZE144 / ZRE144 – Reference Only):

    • Front Right (RH): 48068-12310, 48068-02180

    • Front Left (LH): 48069-12310, 48069-02180

  • Popular Aftermarket Brands: 555 (Sankei Japan), CTR (Korea), Febest, JIKIU, Yamato, RBI, and Tenacity.

Reviews

There are no reviews yet.

Be the first to review “Toyota Axio Model 2007-2012 Lower Control Arms”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)