Toyota BB Front Shocks

(0 Reviews) Write a review
Core Architectural Specifications
  • Suspension Architecture: Independent MacPherson Strut setup. [1, 2]
  • Internal Strut Mechanics: Gas-Pressure Twin-Tube low-pressure nitrogen configuration (OEA standard engineered to prevent hydraulic fluid cavitation and foaming over uneven road surfaces). [1, 2]
  • Shock Absorber Design: Structural Suspension Strut (operates as a critical load-bearing suspension path and structural carrier for the front steering knuckle assembly). [1, 2]
  • Mounting Configuration: Symmetrical Top Pin / Stud upper chassis link fastened via a 3-bolt tower pattern, paired with a heavy-duty Saddle Bracket / Bottom Plate dual-bolt steering knuckle housing clamp layout. [1, 2, 3]
Generation & Chassis Variations
The specific internal valving metrics and structural dimension baselines split precisely across the two prominent Japanese Domestic Market (JDM) production generations:
1. First Generation: NCP30 Platform (2000–2005) — NCP30 (1.3L 2NZ-FE) / NCP31 (1.5L 1NZ-FE) / NCP35 (4WD)
  • Chassis Setup: Shared global Toyota NBC platform footprint. [1, 2]
  • KYB (Excel-G Series) Aftermarket Part Numbers:
    • Front Right Hand (RH): 333368
    • Front Left Hand (LH): 333369

  • Subaru/Toyota Genuine OEM Base Roots: 48510-59135, 48520-59135, 48510-49035. [1]
2. Second Generation: QNC20 Platform (2006–2016) — QNC20 (1.3L K3-VE) / QNC21 (1.5L 3SZ-VE) / QNC25 (4WD)
  • Chassis Setup: Co-developed Daihatsu sub-compact baseline matrix. [1, 2]
  • KYB (Excel-G Series) Aftermarket Part Numbers:
    • Front Right Hand (RH): 3350000
    • Front Left Hand (LH): 3350001 [1, 2]

  • Subaru/Toyota Genuine OEM Base Roots: 48510-B1030, 48520-B1030, 48510-B1070. [1]
Structural Fastener Installation Torques
  • Strut-to-Steering Knuckle Clamp Bolts (Bottom dual-bolts): 153 Nm (113 ft-lbs).
  • Upper Chassis Tower Flange Mounting Nuts (3-bolt layout): 39 Nm (29 ft-lbs).
  • Center Strut Piston Rod Retaining Nut: 47 Nm (34 ft-lbs).
  • Front Sway Bar Stabilizer Link End Nuts: 74 Nm (55 ft-lbs). [1, 2]

KSh3,000.00

In stock
Buy now

Description

Product Description: Toyota bB (NCP30 / NCP31 / QNC20 / QNC21 Series) Front Shock Absorbers / Suspension Struts

Overview

The Front Shock Absorber & Strut Set for the Toyota bB (NCP30 / NCP31 1st Gen 2000–2005 & QNC20 / QNC21 / QNC25 2nd Gen 2005–2016) is an OEM-spec front suspension replacement designed to restore vehicle stability, original dampening performance, and cabin comfort. Engineered specifically for Toyota’s compact box-platform architecture, these front struts absorb harsh road impacts, reduce front-end body roll during cornering, and maintain firm tire contact with the road for safe and predictable handling.

Technical Specifications & Characteristics

  • Vehicle Compatibility:

    • 1st Generation: Toyota bB (NCP30 1.3L 2NZ-FE, NCP31 1.5L 1NZ-FE, NCP35 4WD, 2000–2005)

    • 2nd Generation: Toyota bB (QNC20 1.3L K3-VE, QNC21 1.5L 3SZ-VE, QNC25 4WD, 2005–2016)

  • Position: Front Axle (Front Left – LH & Front Right – RH specific)

  • Strut Design Type: MacPherson Strut Assembly with lower steering knuckle bracket, spring seat, and sway bar link mounting tab.

  • Operating System: Twin-Tube Low-Pressure Nitrogen Gas Pressurized Hydraulic System

  • Damping Medium: All-weather multi-grade synthetic hydraulic fluid with pressurized nitrogen gas to eliminate oil foaming and thermal fade.

  • Build Quality: High-tensile seamless steel outer cylinder housing with a hardened, micro-polished chrome piston rod and multi-lip rubber seal.

Key Features & Performance Benefits

  1. Restored Handling & Steering Response: Eliminates front-end float, excessive body lean in turns, and steering wheel wander over uneven road surfaces.

  2. Eliminates Nose Dive & Bottoming Out: Reduces sharp front-end dipping during heavy braking and protects chassis bump stops when negotiating speed bumps or potholes.

  3. Smooth & Quiet Cabin Isolation: Dampens road vibrations and tire impact noise, restoring original Japanese factory ride comfort for daily urban driving.

  4. Direct OEM Fitment: Matches original Toyota/Daihatsu factory mounting dimensions, brake hose bracket points, and sway bar link positioning for hassle-free bolt-on installation.

Variant & Fitment Notes (1st Gen NCP vs. 2nd Gen QNC)

Important: The Toyota bB transitioned from Toyota’s Vitz/Funcargo platform (NCP30 series) to a Daihatsu-developed platform (QNC20 series) for its second generation. Front struts are NOT interchangeable between NCP and QNC generations.

  • Toyota OEM Reference Numbers (1st Gen NCP30 / NCP31):

    • Front Right (RH): 48510-59325, 48510-52210, 48510-52220

    • Front Left (LH): 48520-59145, 48520-52210, 48520-52220

  • Toyota / Daihatsu OEM Reference Numbers (2nd Gen QNC20 / QNC21):

    • Front Right (RH): 48510-B1030, 48510-B1031, 48510-B1070

    • Front Left (LH): 48520-B1030, 48520-B1031, 48520-B1070

  • Popular Aftermarket Brands: KYB Excel-G (333368 / 333369 for NCP; 332118 / 332119 for QNC), Tokico, Monroe, GAB, and Febest.

Reviews

There are no reviews yet.

Be the first to review “Toyota BB Front Shocks”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)