Toyota fielder Model 2015-2010 Lower Control Arms

(0 Reviews) Write a review
Toyota Corolla Fielder (2010–2015) Lower Control Arm Technical Specifications

The Toyota Corolla Fielder spanning the 2010–2015 timeline transitions across two structural generations: the Late E140 Series (2010–2012) and the Early E160 Series (2012–2015). Both generations utilize an L-shaped MacPherson strut lower wishbone arm matrix, but they feature distinct factory part configurations and physical bushing dimensions. [1, 2, 3, 4]
1. E140 Series Fielder (2010–2012 Production)

  • Chassis System Codes: NZE141G, NZE144G (4WD), ZRE142G, ZRE144G (4WD) [1]
  • Right Hand (RH) Control Arm OEM: 48068-12300 / 48068-12290 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-12300 / 48069-12290 [1, 2]
  • Dimensional Parameters & Bushings:
    • Forward Pivot Bolt Sleeve ID: 14.2 mm
    • Rear Large Bushing Outer Diameter (OD): 65.2 mm
    • Bushing Component Component Refs: Small Front Bushing (48654-12150 / RU-494); Large Rear Bushing (48655-12120 / RU-495 / TAB-145).

2. E160 Series Fielder (2012–2015 Production)

  • Chassis System Codes: NZE161G, NZE164G (4WD), NRE161G, NKE165G (Hybrid Wagon) [1, 2]
  • Right Hand (RH) Control Arm OEM: 48068-59135 / 48068-59145 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-59135 / 48069-59145 [1, 2]
  • Bushing Configuration Specs:
    • Features a redesigned low-profile stamped frame geometry to decrease vehicle curb weight on the E160 platform.
    • Pressed Elastomeric Bushing Ref: RU-519 (Masuma tracking variant).
    • Ball Joint Compatibility Ref: MB-3602 (Features specialized dust boot configuration MO-2112). [1, 2]

3. Engineering Material & Layout Layout Specs

  • Structural Frame Shell: Robotic-welded heavy-gauge stamped carbon steel sheet matrix. [1]
  • Pivot Configuration: 3-Point multi-axis movement tracking (Inner front horizontal rubber bush, inner rear vertical trailing bush, and outer ball joint knuckle receptacle). [1]
  • Drivetrain Variance (2WD vs 4WD): 4WD platforms (NZE144G / NZE164G) utilize alternative bushing durometer tolerances along the inner sleeves to absorb transfer-case counter-shudder, despite sharing spatial geometries with FWD counterparts.[1, 2]

KSh4,000.00

In stock
Buy now

Description

Toyota Corolla Fielder (2010–2015) Lower Control Arm Technical Specifications

The Toyota Corolla Fielder spanning the 2010–2015 timeline transitions across two structural generations: the Late E140 Series (2010–2012) and the Early E160 Series (2012–2015). Both generations utilize an L-shaped MacPherson strut lower wishbone arm matrix, but they feature distinct factory part configurations and physical bushing dimensions. [1, 2, 3, 4]
1. E140 Series Fielder (2010–2012 Production)

  • Chassis System Codes: NZE141G, NZE144G (4WD), ZRE142G, ZRE144G (4WD) [1]
  • Right Hand (RH) Control Arm OEM: 48068-12300 / 48068-12290 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-12300 / 48069-12290 [1, 2]
  • Dimensional Parameters & Bushings:
    • Forward Pivot Bolt Sleeve ID: 14.2 mm
    • Rear Large Bushing Outer Diameter (OD): 65.2 mm
    • Bushing Component Component Refs: Small Front Bushing (48654-12150 / RU-494); Large Rear Bushing (48655-12120 / RU-495 / TAB-145).

2. E160 Series Fielder (2012–2015 Production)

  • Chassis System Codes: NZE161G, NZE164G (4WD), NRE161G, NKE165G (Hybrid Wagon) [1, 2]
  • Right Hand (RH) Control Arm OEM: 48068-59135 / 48068-59145 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-59135 / 48069-59145 [1, 2]
  • Bushing Configuration Specs:
    • Features a redesigned low-profile stamped frame geometry to decrease vehicle curb weight on the E160 platform.
    • Pressed Elastomeric Bushing Ref: RU-519 (Masuma tracking variant).
    • Ball Joint Compatibility Ref: MB-3602 (Features specialized dust boot configuration MO-2112). [1, 2]

3. Engineering Material & Layout Layout Specs

  • Structural Frame Shell: Robotic-welded heavy-gauge stamped carbon steel sheet matrix. [1]
  • Pivot Configuration: 3-Point multi-axis movement tracking (Inner front horizontal rubber bush, inner rear vertical trailing bush, and outer ball joint knuckle receptacle). [1]
  • Drivetrain Variance (2WD vs 4WD): 4WD platforms (NZE144G / NZE164G) utilize alternative bushing durometer tolerances along the inner sleeves to absorb transfer-case counter-shudder, despite sharing spatial geometries with FWD counterparts.

    [1, 2]

Reviews

There are no reviews yet.

Be the first to review “Toyota fielder Model 2015-2010 Lower Control Arms”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)