Toyota Nze Lower Control Arms

(0 Reviews) Write a review
Toyota Corolla NZE Series Front Lower Control Arm Technical Specifications

The front lower control arms for the Toyota Corolla NZE series (predominantly the NZE121 and NZE141 chassis generations, matching the 1.5L 1NZ-FE platform) utilize a conventional L-shaped MacPherson strut lower wishbone architecture. This assembly establishes a structural connection between the lower steering knuckle and the vehicle’s main engine subframe crossmember. [1, 2, 3]
1. E120 Generation NZE Series (Production 2000–2006)

  • Chassis Codes Covered: NZE121, ZZE122, CZE121 [1, 2]
  • Right Hand (RH) Front Lower Control Arm OE: 48068-20400 / 48068-12220 [1, 2]
  • Left Hand (LH) Front Lower Control Arm OE: 48069-20400 / 48069-12220 [1, 2]
  • Structural Material: Stamped structural carbon sheet steel. [1, 2]
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Pivot Sleeve (Inner Diameter): 14.2 mm (Matches M14 alignment fasteners).
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.5 mm

  • Pressed Elastomeric Sub-Components:
    • Small Front Bushing Ref: 48654-12120 / RU-357 (Dimensions: 14.2mm ID × 39.0mm OD × 59.0mm Length)
    • Large Rear Bushing Ref: 48655-12170 / RU-385 / TAB-026 (Dimensions: 14.5mm ID × 68.5mm OD × 60.0mm Length) [1]

  • Platform Sharing / Cross-Compatibility: Interchanges directly with the Toyota Allion/Premio (240 series), Toyota Wish (10 series), and the Toyota Matrix (ZZE130). [1, 2]
2. E140 Generation NZE Series (Production 2007–2012)

  • Chassis Codes Covered: NZE141 (Axio / Fielder variants) [1, 2]
  • Right Hand (RH) Front Lower Control Arm OE: 48068-12300 / 48068-12290 [1, 2]
  • Left Hand (LH) Front Lower Control Arm OE: 48069-12300 / 48069-12290 [1]
  • Component Weight: Approximately 3.15 kg per side assembly.
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Pivot Sleeve (Inner Diameter): 14.2 mm
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.4 mm

  • Pressed Elastomeric Sub-Components:
    • Small Front Bushing Ref: 48654-12150 / RU-494 (Dimensions: 14.2mm ID × 38.2mm OD × 61.0mm Length)
    • Large Rear Bushing Ref: 48655-12120 / RU-495 / TAB-145 (Dimensions: 14.4mm ID × 65.2mm OD × 55.0mm Length)

3. Structural Alignment & Geometry Overview

  • Mounting Interface Layout: 3-Point multi-axis tracking (Inner forward horizontal bushing + Inner rear vertical bush + Outer steering knuckle ball joint receiver flange).
  • Elastomeric Compound Type: High-durometer vulcanized natural rubber (NR) bonded inside steel backing sleeves. [1, 2, 3]

KSh4,000.00

In stock
Buy now

Description

Product Description: Toyota Corolla NZE121 / ZZE122 (120-Series, 2001–2007) Front Lower Control Arms (Transverse Link Assemblies)

Overview

The Front Lower Control Arm Assemblies for the Toyota Corolla NZE121 / ZZE122 (120-Series 2WD Platform 2001–2007, 1.5L 1NZ-FE & 1.8L 1ZZ-FE) are OEM-spec, heavy-duty front suspension arms engineered to restore precise steering tracking, eliminate front-end clunking, and stabilize wheel alignment. Serving as the primary structural link connecting the front steering knuckle to the engine subframe, each arm comes pre-assembled with durable rubber isolation bushings and a low-friction ball joint to deliver smooth ride comfort and responsive handling.

Technical Specifications & Characteristics

  • Vehicle Compatibility: 2001–2007 Toyota Corolla NZE121 (1.5L 2WD), ZZE122 (1.8L 2WD), and CE121 (2.2L Diesel 2WD)

    • (Also cross-fits Toyota Corolla Fielder NZE121G/ZZE122G, Corolla RunX / Allex NZE121/ZZE122, Toyota Premio/Allion NZT240/ZZT240, and Toyota Wish ZNE10).

  • Position: Front Axle Lower Suspension (Left Hand LH 48069-12240 / 48069-02060 & Right Hand RH 48068-12240 / 48068-02060 side-specific).

  • Assembly Components Included:

    1. Stamped Heavy-Gauge Steel Control Arm: High-tensile structural steel body with corrosion-resistant e-coating.

    2. Front Hydro-Cushion / Pivot Bushing: Pre-pressed forward pivot bushing for vertical suspension articulation.

    3. Rear Large Compliance Bushing: Pre-pressed heavy-duty rear rubber bushing engineered to absorb road impact shocks and braking forces.

    4. Lower Ball Joint: Direct-fit bolt-on lower ball joint with induction-hardened stud and synthetic grease boot.

  • Material Construction: Stamped carbon steel body with high-durometer Natural Rubber (NR) bushings.

  • Fitment Type: Direct factory bolt-on unit using original subframe chassis bolts and steering knuckle pinch bolts.

Key Features & Performance Benefits

  1. Eliminates Front End Clunking & Knocking: Replaces torn, cracked, or fluid-leaking rubber bushings and loose ball joints, curing clunking sounds over speed bumps and rough road surfaces.

  2. Restores Precise Steering Response & Alignment: Eliminates arm deflection under cornering and braking, keeping camber and toe angles locked in to prevent uneven, accelerated tire edge wear.

  3. Absorbs Road Shocks & Cabin Harshness: High-quality rubber compliance bushings filter out road harshness and vibration before it transmits into the unibody and steering wheel.

  4. Complete Pre-Assembled Units: Comes fully assembled with bushings and ball joint ready for installation, eliminating the need for hydraulic shop presses during replacement.

Variant & Fitment Notes (2WD NZE121 / ZZE122 vs. 4WD NZE124 / ZZE124)

Important: 2WD 120-Series Corolla NZE121 lower control arms feature standard subframe mounting dimensions and ball joint taper angles. 4WD models (NZE124 / ZZE124) feature distinct subframe offset profiles and modified ball joint mounting geometry:

  • 2WD Models (NZE121 / ZZE122 / CE121) OEM Reference:

    • Front Right (RH): 48068-12240, 48068-02060, 48068-20390

    • Front Left (LH): 48069-12240, 48069-02060, 48069-20390

  • 4WD Models (NZE124 / ZZE124 – Reference Only):

    • Front Right (RH): 48068-12250, 48068-02070

    • Front Left (LH): 48069-12250, 48069-02070

  • Popular Aftermarket Brands: 555 (Sankei Japan), CTR (Korea), Febest, JIKIU, Yamato, RBI, and Tenacity.

Reviews

There are no reviews yet.

Be the first to review “Toyota Nze Lower Control Arms”

Your email address will not be published. Required fields are marked *

Please select your product
Product has been added to your cart
Compare (0)