Sort

Nissan Note Model E12 Lower Arm Control

KSh4,000.00
Nissan Note (Model E12) Front Lower Control Arm Technical Specifications
  • Suspension Type: MacPherson strut front independent suspension lower track control arm.
  • Control Arm Material: Stamped sheet steel (welded assembly configuration).
  • Component Weight: Approximately 2.49 kg per side (complete assembly including ball joint and bushings).
  • Total Component Length: 338 mm.
  • Ball Joint Cone Pin Size: 16 mm diameter.
  • Bushing Design: Horizontal front rubber pivot mounting bush and an upright rear cylindrical rubber dampening mount.
  • Assembly Inclusions: Pre-installed non-adjustable press-fit outer ball joint and vulcanized rubber mounting bushings. [1, 2, 3, 4]
Genuine OEM Part Numbers
  • Front Right Hand (RH) Lower Arm: 54500-1HM0B, 54500-1HA0C, 54500-1HA5A, 54500-1HA5D, 54500-1HA6A
  • Front Left Hand (LH) Lower Arm: 54501-1HM0B, 54501-1HA0C, 54501-1HA5A, 54501-1HA5D, 54501-1HA6A
  • Chassis/Model Codes: E12 Series (2012–2020)
  • Engine Compatibility: HR12DE, HR12DDR, HR15DE, HR16DE

Mitsubishi EK Lower Control Arms

KSh4,500.00
Part Identification & Cross-References
  • 3rd Generation OEM Left (Driver Side): 4013A639, 4013A495 (B11W / B11A Chassis)
  • 3rd Generation OEM Right (Passenger Side): 4013A640, 4013A496 (B11W / B11A Chassis)
  • 2nd Generation OEM Reference: MR554647 (H82W / H81W Chassis)
  • Aftermarket Substitutes: SKF 4013A495-B (Heavy-duty bush application)
  • Component Assembly: Pre-assembled, triangular L-shaped unit integrating a small front horizontal pivot bushing, a large rear vertical compliance bushing, and a fixed, non-serviceable ball joint mechanism.
Physical Construction
  • Body Material: High-Tensile Stamped Sheet Metal / Heavy-Gauge Pressed Steel
  • Coating: Corrosion-resistant black electro-deposition coating (ED-coat)
  • Ball Joint Connection: Tapered pin profile built for a cross-axis transverse pinch bolt locking method inside the wheel knuckle base.
Tightening Torque Specifications
  • Front Pivot Bolt (Horizontal-to-Subframe): 74 to 85 ft-lbs (100 to 115 N·m)
  • Rear Compliance Bushing Bolt (Vertical-to-Subframe): 81 to 96 ft-lbs (110 to 130 N·m)
  • Lower Ball Joint Pinch Bolt to Steering Knuckle: 41 to 46 ft-lbs (55 to 62 N·m)
  • Anti-Roll / Stabilizer Bar End Link to Lower Arm Nut: 26 ft-lbs (35 N·m)
  • Front Wheel Lug Nuts: 76 ft-lbs (103 N·m)

Nissan Dayz Lower Control Arm

KSh4,000.00
Part Identification & Cross-References
  • 1st Generation OEM Right (Passenger Side): 54504-6A00E, 54504-6A00G (B21W / B21A Roox)
  • 1st Generation OEM Left (Driver Side): 54505-6A00J (B21W)
  • 2nd Generation OEM Right/Left Reference: 54501-7MA0B (B43W, B44W, B45W, B47W chassis architecture)
  • Component Assembly: Comprises a pre-pressed horizontal front pivot bushing, a larger vertical rear compliance bushing, and a factory-integrated, non-serviceable outboard lower ball joint.
Physical Construction
  • Material Base: Stamped / Pressed High-Tensile Sheet Steel
  • Surface Finish: Anti-corrosive black electro-deposition coating (ED-paint)
  • Joint Configurations: Tapered ball joint pin designed specifically for a cross-axis horizontal pinch-bolt fitting at the steering knuckle throat base.
Tightening Torque Specifications
  • Front Pivot Bolt (Horizontal to Subframe): 74 to 85 ft-lbs (100 to 115 N·m)
  • Rear Compliance Bushing Bolt (Vertical to Subframe): 81 to 96 ft-lbs (110 to 130 N·m)
  • Lower Ball Joint Pinch Bolt to Steering Knuckle: 41 to 46 ft-lbs (55 to 62 N·m)
  • Stabilizer Bar End Link to Control Arm Base Nut: 26 ft-lbs (35 N·m)
  • Front Wheel Lug Nuts: 76 ft-lbs (103 N·m)

Mazda CX3 Lower Control Arms

KSh6,000.00
Part Identification & Platform Fitment
    • OEM Right (Passenger Side) Part Number: D10E-34-300 (2015–2018) / D24H-34-300C (2018–2021) [1, 2]
    • OEM Left (Driver Side) Part Number: D10E-34-350 (2015–2018) / D24H-34-350C (2018–2021) [1, 2, 3]
    • Design Type: Triangular A-Arm / L-Shaped Lower Suspension Arm
    • Component Assembly: One-piece stamped high-tensile steel frame with pre-pressed inner horizontal pivot rubber bushing, an outer rear compliance vertical bushing, and a non-serviceable factory-integrated lower ball joint. [1, 2]
    • Drivetrain Compatibility: Direct replacement fitment for both Front-Wheel Drive (FWD) and All-Wheel Drive (AWD) variants across 1.5L TD, 1.8L TD, and 2.0L SkyActiv-G engines. [1, 2]
Component Construction & Mass Dimensions
    • Material Treatment: Electro-deposition (ED) coating/painting for anti-corrosion resistance
    • Average Shipping Weight: ~3.65 kg (8.05 lbs) per side
    • Ball Joint Stud Profile: Tapered pin, designed for a cross-axis pinch bolt fixing mechanism on the steering knuckle housing. [1]
Tightening Torque Specifications
    • Front (Horizontal Pivot) Bushing Bolt to Subframe: 97 to 116 N·m (72 to 85 ft-lbs)
    • Rear (Vertical Compliance Bushing) Retaining Bracket Bolts: 130 to 154 N·m (96 to 113 ft-lbs)
    • Lower Ball Joint Pinch Bolt to Steering Knuckle: 44 to 53 N·m (33 to 39 ft-lbs)
    • Front Anti-Roll / Stabilizer Bar End Link to Lower Arm Nut: 44 to 53 N·m (33 to 39 ft-lbs)

Honda Airwave Lower Arm Control

KSh4,000.00
Part Identification & Fitment
  • OEM Right (Passenger Side) Part Number: 51350-SLA-023, 51350-SLA-033
  • OEM Left (Driver Side) Part Number: 51360-SLA-023, 51360-SLA-J04
  • Design Type: Triangular L-shaped A-arm
  • Component Assembly: Rigid steel body with a pre-installed horizontal pivot bushing (front), a vertical compliance bushing (rear), and an integrated non-serviceable lower ball joint. [1, 2, 3, 4]
Physical Dimensions (Standard Aftermarket Market Multi-Fit)
  • Material: Pressed Steel
  • Length: 480 mm
  • Width: 400 mm
  • Height: 87 mm
  • Average Weight: ~4.51 kg (9.9 lbs) [1]
Fastener Torque Specifications
  • Front (Horizontal) Control Arm-to-Subframe Bolt: 40 ft-lbs (54 Nm)
  • Rear (Vertical) Compliance Bushing-to-Subframe Bolt: 61 ft-lbs (83 Nm)
  • Lower Ball Joint Castle Nut to Steering Knuckle: 36 to 43 ft-lbs (49 to 59 Nm) (Note: Tighten further within this range only to align the castle nut slot with the ball joint cotter pin hole).
  • Stabilizer / Sway Bar End Link to Lower Arm Nut: 22 ft-lbs (30 Nm)

Mitsubishi Colt Lower Arms Control

KSh4,000.00
Part Identification & Fitment
  • OEM Left (Driver Side) Part Number: MN101373 (Varies slightly by engine variant)
  • OEM Right (Passenger Side) Part Number: MN101374
  • Design Type: Triangular A-Arm for independent MacPherson strut front suspension.
  • Component Assembly: Sheet metal or hardened steel construction featuring a pre-installed inner horizontal pivot bushing, an outer rear vertical compliance bushing, and an integrated lower ball joint. [1, 2, 3, 4]
Component Dimensions & Interface
  • Material Type: Pressed Sheet Metal / Hardened Steel
  • Component Mass: ~3.78 kg (8.32 lbs)
  • Ball Joint Cone Size: Ø 15 mm
  • Ball Joint Pin Thread: M12 x 1.5
  • Ball Joint Starting Torque: 0 to 3.9 N·m (0 to 2.9 ft-lbs) [1, 2, 3]
Fastener Torque Specifications
  • Rear (Vertical) Control Arm-to-Subframe Fastener: 145 N·m (107 ft-lbs)
  • Front (Horizontal) Control Arm-to-Subframe Pivot Bolt: 115 N·m (85 ft-lbs)
  • Lower Ball Joint Pinch Bolt to Steering Knuckle: 52 to 60 N·m (38 to 44 ft-lbs)
  • Anti-Roll Bar / Stabilizer Link to Lower Arm Nut: 30 N·m (22 ft-lbs) [1, 2]
Standard Front Wheel Alignment Specifications
  • Toe-In: 0 ± 2 mm (Toe angle: 0°00' ± 0°06')
  • Camber: -0°30' ± 0°30'
  • Caster: 2°35' ± 0°30'
  • Kingpin Inclination: 13°20' ± 0°30'[1]

Honda Insight Model 2014 Lower Control Arm

KSh4,000.00
Part Numbers & Placement
  • OEM Right (Passenger Side) Part Number: 51350-TM8-A01
  • OEM Left (Driver Side) Part Number: 51360-TM8-A01
  • Design Type: A-shape / Triangular lower suspension arm
  • Component Assembly: Fully integrated unit containing the lower control arm body, compliance rubber bushings, and an integrated non-serviceable lower ball joint. [1, 2, 3, 4, 5]
Physical Dimensions (Standard Aftermarket Market Multi-Fit)
  • Material: Sheet Steel
  • Length: 590 mm
  • Width: 320 mm
  • Height: 90 mm [1]
Fastener Torque Specifications
  • Front (Horizontal) Control Arm-to-Subframe Bolt: 54 ft-lbs (73 Nm)
  • Rear (Vertical) Compliance Bushing-to-Subframe Bolts: 51 ft-lbs (69 Nm)
  • Ball Joint Castle Nut to Steering Knuckle: 40 to 47 ft-lbs (54 to 64 Nm) (Note: Tighten further if needed only to align the castle nut gaps with the ball joint hole to insert a new cotter pin).
  • Control Arm Guard/Splash Plate Bolts: 16 ft-lbs (22 Nm)

Honda Insight Model 2013 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TK6-A01 / 51350-TF5-A00
Dimensional Specifications
  • Arm Segment Length: 357 mm
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5 Right-Hand Thread (RHT)
  • Subframe Mounting Alignment: Configured for standard factory 17 mm and 19 mm hex flange fasteners.
Material & Component Properties
  • Structural Material: High-tensile stamped sheet steel matrix engineered for strict vehicle weight reduction and crash safety energy absorption.
  • Pre-assembled Bushings: Features a large, rearward horizontal rubber compliance damper ("hockey puck" style bushing) paired with a forward horizontal steel sleeve inner bushing to manage vehicle NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a high-flexibility protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) for maximum rust resistance.
  • Net Unit Weight: ~3.24 kg (7.14 lbs) per bare side arm assembly.

Honda Insight Model 2012 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TK6-A01 / 51350-TF5-A00
Dimensional Specifications
  • Arm Segment Length: 357 mm
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5 Right-Hand Thread (RHT)
  • Subframe Mounting Alignment: Configured for standard factory 17 mm and 19 mm hex flange fasteners.
Material & Component Properties
  • Structural Material: High-tensile stamped sheet steel matrix engineered for strict vehicle weight reduction and crash safety energy absorption.
  • Pre-assembled Bushings: Features a large, rearward horizontal rubber compliance damper ("hockey puck" style bushing) paired with a forward horizontal steel sleeve inner bushing to manage vehicle NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a high-flexibility protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) for maximum rust resistance.
  • Net Unit Weight: ~3.24 kg (7.14 lbs) per bare side arm assembly.

Honda Insight Model 2011 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TK6-A01 / 51350-TF5-A00 [1, 2, 3]
Dimensional Specifications
  • Arm Segment Length: 357 mm (Note: Total packaged box profile length spans up to 590 mm)
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5 Right-Hand Thread (RHT)
  • Subframe Mounting Alignment: Configured for standard factory 17 mm and 19 mm hex flange fasteners. [1, 2]
Material & Component Properties
  • Structural Material: High-tensile stamped sheet steel matrix engineered for strict vehicle weight reduction and crash safety energy absorption. [1]
  • Pre-assembled Bushings: Features a large, rearward horizontal rubber compliance damper ("hockey puck" style bushing) paired with a forward horizontal steel sleeve inner bushing to manage vehicle NVH (Noise, Vibration, and Harshness). [1]
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a high-flexibility protective rubber dust boot. [1, 2]
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) for maximum rust resistance.
  • Net Unit Weight: ~3.24 kg (7.14 lbs) per bare side arm assembly. [1]

Honda Insight Model 2010 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TK6-A01 / 51360-TF5-A00 / 51360-TG5-C01
  • Front Right Side (RHS): 51350-TK6-A01 / 51350-TF5-A00 / 51350-TM8-A01 / 51350-TG5-C01 [1, 2, 3]
Dimensional Specifications
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5
  • Subframe Flange Mounting Bolt Compatibility: Matches 17 mm and 19 mm factory hex flange bolt configurations.
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel matrix engineered for optimized vehicle weight distribution and strength.
  • Pre-assembled Bushings: Features a large, rearward horizontal rubber compliance damper ("hockey puck" style bushing) paired with a forward horizontal inner steel sleeve bushing to absorb road vibrations and isolate Cabin NVH (Noise, Vibration, and Harshness). [1, 2]
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a high-flexibility protective rubber dust boot. [1]
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) for rust prevention.
  • Net Unit Weight: ~3.3 kg to 4.7 kg per side (depending on whether it is a bare aftermarket steel variant or a complete factory assembly with bracket layout). [1, 2]

Honda Fit Model 2014 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Third Generation (GK Series – GK5 Chassis, Late 2014+):
    • Front Right Side (RHS): 51350-T5G-H01 / 51350-T5R-A00
    • Front Left Side (LHS): 51360-T5G-H01 / 51360-T5R-A00 [1]
  • Second Generation (GE Series – GE6 / GE8 / GP1, Early 2014 Production):
    • Front Right Side (RHS): 51350-TF0-030 / 51350-TK6-A01
    • Front Left Side (LHS): 51360-TF0-030 / 51360-TK6-A01 [1, 2]
Dimensional Specifications
  • Second Generation (GE Chassis):
    • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
    • Ball Pin / Joint External Thread Size: M14 x 1.5
    • Net Unit Weight: ~3.3 kg (7.27 lbs) per side [1]
  • Third Generation (GK Chassis):
    • Ball Joint Cone Size: Ø 16 mm
    • Ball Pin / Joint External Thread Size: M12 x 1.25
    • Net Unit Weight: ~3.1 kg (6.83 lbs) per side
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel / structural metal matrix.
  • Pre-assembled Bushings: Features a large, rearward horizontal compliance damper ("hockey puck" style rubber bushing) paired with a forward horizontal inner sleeve bushing to isolate NVH.
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating) or powder finish. [1, 2, 3]

Honda Fit Model 2013 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TF0-030 / 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TF0-030 / 51350-TK6-A01 / 51350-TF5-A00
Dimensional Specifications
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5
  • Subframe Flange Mounting Bolt Sizing: 17 mm and 19 mm hex flange bolts
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel / structural metal matrix.
  • Pre-assembled Bushings: Features a large, rearward horizontal hydraulic/rubber cylindrical compliance damper ("hockey puck" style bushing) paired with a forward horizontal inner sleeve bushing to isolate NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating).
  • Net Unit Weight: ~3.3 kg (7.27 lbs) per side.

Honda Fit Model 2012 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TF0-030 / 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TF0-030 / 51350-TK6-A01 / 51350-TF5-A00
Dimensional Specifications
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5
  • Subframe Flange Mounting Bolt Sizing: 17 mm and 19 mm hex flange bolts
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel / structural metal matrix.
  • Pre-assembled Bushings: Features a large, rearward horizontal hydraulic/rubber cylindrical compliance damper ("hockey puck" style bushing) paired with a forward horizontal inner sleeve bushing to isolate NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating).
  • Net Unit Weight: ~3.3 kg (7.27 lbs) per side.

Honda Fit Model 2011 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS): 51360-TF0-030 / 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS): 51350-TF0-030 / 51350-TK6-A01 / 51350-TF5-A00
Dimensional Specifications
  • Ball Joint Cone Size / Pivot Diameter: Ø 17.5 mm
  • Ball Pin / Joint External Thread Size: M14 x 1.5
  • Subframe Flange Mounting Bolt Sizing: 17 mm and 19 mm hex flange bolts
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel / structural metal matrix.
  • Pre-assembled Bushings: Features a large, rearward horizontal hydraulic/rubber cylindrical compliance damper ("hockey puck" style bushing) paired with a forward horizontal inner sleeve bushing to isolate NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating).
  • Net Unit Weight: ~3.3 kg (7.27 lbs) per side.

Honda Fit Model 2010 Lower Control Arm

KSh4,000.00
OEM / Reference Part Numbers
  • Front Left Side (LHS / Driver Side): 51360-TF0-030 / 51360-TK6-A01 / 51360-TF5-A00
  • Front Right Side (RHS / Passenger Side): 51350-TF0-030 / 51350-TK6-A01 / 51350-TF5-A00 [1, 2, 3, 4]
Dimensional Specifications
  • Ball Joint Cone Size: Ø 17.5 mm
  • Ball Pin / Joint External Thread: M14 x 1.5
  • Subframe Flange Mounting Bolt Sizing: 17 mm and 19 mm hex flange bolts [1, 2]
Material & Component Properties
  • Structural Material: Heavy-duty stamped sheet steel / structural metal matrix.
  • Pre-assembled Bushings: Features a large, rearward horizontal hydraulic/rubber cylindrical damper ("hockey puck" style bushing) paired with a forward horizontal inner sleeve bushing to isolate NVH (Noise, Vibration, and Harshness).
  • Ball Joint Assembly: Integrated pre-greased, sealed heavy-duty lower ball joint with a protective rubber dust boot.
  • Surface Coating: High-durability black anti-corrosion electro-deposition paint (E-coating).
  • Net Unit Weight: ~3.3 kg (7.27 lbs) per side.[1, 2, 3, 4, 5]

Suzuki Alto Model 2016 Lower Control Arm

KSh5,000.00
OEM Part Numbers
  • Japan-market/HA36 Generation:
    • Front Right Side (RHS): 45201-74P10 / 45201-74P00
    • Front Left Side (LHS): 45202-74P10 [1]
  • Export-market/GF Generation (1.0L K10B):
    • Front Right Side (RHS): 45201M68K00
    • Front Left Side (LHS): 45202M68K00 [1, 2]
Dimensional Specifications
  • Total Length: 281.2 mm (Note: Select international 1.0L variations feature an extended profile up to 460 mm)
  • Overall Height: 81 mm
  • Ball Pin / Joint External Thread: M12 x 1.25
  • Fitted / Cone Stud Diameter: 13.5 mm to 15 mm
  • Bushing Inner/Bore Diameter: 12 mm [1, 2, 3, 4]
Material & Build Properties
  • Structural Material: Heavy-duty stamped sheet steel (Premium aftermarket options utilize high-tensile forged steel).
  • Pre-assembled Components: Integrated natural rubber silent-block bushings and pre-greased, sealed lower ball joint assembly.
  • Surface Coating: Anti-corrosion electro-deposition paint (E-coating) or black powder coat finish.
  • Average Weight: 1.05 kg – 1.15 kg per side. [1, 2]

Suzuki Alto Model 2017 Lower Control Arm

KSh5,000.00
OEM Part Numbers
  • Front Right Side (RHS): 45201-74P10 / 45201-74P00
  • Front Left Side (LHS): 45202-74P10 [1, 2]
Dimensional Specifications
  • Total Length: ~281.2 mm to 282 mm
  • Overall Height: 81 mm
  • Ball Pin / Joint External Thread: M12 x 1.25
  • Cone / Ball Joint Stud Size: 13.4 mm to 15 mm
  • Inner/Bore Diameter (Bushing Sleeve): 12 mm to 14 mm [1, 2, 3, 4]
Material & Build Properties
  • Structural Material: Heavy-duty stamped/sheet structural steel (select premium variants use forged steel).
  • Component Assembly: Pre-installed premium natural rubber silent-block bushings and integrated lower ball joint mount.
  • Coatings: Anti-corrosion electro-deposition paint (E-coating) or black oxide layer finish.
  • Average Weight: 1.05 kg – 1.15 kg per side. [1, 2, 3, 4, 5]

Suzuki Alto Model 2018 Lower Control Arm

KSh5,000.00
Component Overview & Dimensions
  • Component Type: Front Suspension Lower Control Arm (A-Arm / Wishbone).
  • Material Composition: Stamped high-strength sheet steel.
  • Control Arm Type: Trailing link configuration with integrated ball joint and rubber silent-block bushings.
  • Dimensional Profile:
    • Center-to-Center Length: Approximately 281.2 mm.
    • Overall Height: 81.0 mm.
    • Ball Joint External Stud Thread: M12 x 1.25.
    • Inner Bushing Sleeve Diameter: 12.0 mm. [1]
Part Numbers & Factory Designations
  • Front Right Hand (RH) OEM Reference: 45201-74P10 (Alternative factory supersede: 45201-74P00).
  • Front Left Hand (LH) OEM Reference: 45202-74P10 (Alternative factory supersede: 45202-74P00).
  • Interchange Aftermarket ID: 273C0853 (Ridex). [1, 2, 3, 4]
Platform & Vehicle Compatibility
  • Chassis Platform / Generation: Suzuki HA36 Platform (8th Generation Alto).
  • Applicable Model Codes: HA36S, HA36V (including standard JDM versions, Alto Works, and Alto Turbo RS).
  • Cross-Brand Shared Footprint: Swaps its exact geometric layout and mounting pattern with the Suzuki Alto Lapin (HE33S), Suzuki Wagon R (MH35S/MH55S), Suzuki Hustler (MR52S), and Mazda Carol (HB36S). [1, 2]
Fastener Tightening Torque Specifications
  • Inner Pivot/Frame Horizontal Bolt (Control arm front nut): 55 Nm to 70 Nm {41 to 52 ft-lbs}.
  • Rear Vertical Bushing Clamp Mounting Nut: 70 Nm to 85 Nm {52 to 63 ft-lbs}.
  • Ball Joint Pinch Bolt to Steering Knuckle: 45 Nm to 55 Nm {33 to 40 ft-lbs}.
  • Stabilizer/Sway Bar Link to Control Arm Connecting Nut: 30 Nm to 40 Nm.

Mazda Demio Model 2018 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm (Note: Certain unbracketed aftermarket replacements indicate up to 422 mm across extended geometric measurement points).
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Factory-fitted original equipment measures 16 mm, though some heavy-duty replacement matrices use a 17.5 mm variant).
  • Fitting Configuration Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-350B, DA6A-34-350C, DB2R-34-350
    • Major Aftermarket Match: Delphi TC3286
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-300B, DA6A-34-300C, DB2R-34-300
    • Major Aftermarket Match: Delphi TC3287
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer.
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot.
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (DBA-DJ3FS, DBA-DJ3AS 4WD, 3BA-DJLFS, 5BA-DJLFS, DJ5FS, DJ5AS).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT / P5-VPS), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (North American variants derived from the Mazda DJ platform partnership).

Mazda Demio Model 2017 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm (Note: Certain unbracketed aftermarket replacements indicate up to 422 mm across extended geometric points). [1]
  • Total Component Height: 82 mm [1]
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Some heavy-duty premium replacement matrices specify a 17.5 mm cone variant; standard factory factory-fitted OE measures 16 mm). [1]
  • Fitting Configuration Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-350B, DA6A-34-350C, DA7H-34-350
    • Major Aftermarket Match: Delphi TC3286 [1, 2]
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-300B, D23H-34-300, DA6A-34-300C
    • Major Aftermarket Match: Delphi TC3287 [1, 2]
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer.
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (DBA-DJ3FS, DBA-DJ3AS 4WD, DJ5FS, DJ5AS).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership). [1, 2]

Toyota fielder Model 2015-2010 Lower Control Arms

KSh4,000.00
Toyota Corolla Fielder (2010–2015) Lower Control Arm Technical Specifications
The Toyota Corolla Fielder spanning the 2010–2015 timeline transitions across two structural generations: the Late E140 Series (2010–2012) and the Early E160 Series (2012–2015). Both generations utilize an L-shaped MacPherson strut lower wishbone arm matrix, but they feature distinct factory part configurations and physical bushing dimensions. [1, 2, 3, 4]
1. E140 Series Fielder (2010–2012 Production)
  • Chassis System Codes: NZE141G, NZE144G (4WD), ZRE142G, ZRE144G (4WD) [1]
  • Right Hand (RH) Control Arm OEM: 48068-12300 / 48068-12290 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-12300 / 48069-12290 [1, 2]
  • Dimensional Parameters & Bushings:
    • Forward Pivot Bolt Sleeve ID: 14.2 mm
    • Rear Large Bushing Outer Diameter (OD): 65.2 mm
    • Bushing Component Component Refs: Small Front Bushing (48654-12150 / RU-494); Large Rear Bushing (48655-12120 / RU-495 / TAB-145).
2. E160 Series Fielder (2012–2015 Production)
  • Chassis System Codes: NZE161G, NZE164G (4WD), NRE161G, NKE165G (Hybrid Wagon) [1, 2]
  • Right Hand (RH) Control Arm OEM: 48068-59135 / 48068-59145 [1, 2]
  • Left Hand (LH) Control Arm OEM: 48069-59135 / 48069-59145 [1, 2]
  • Bushing Configuration Specs:
    • Features a redesigned low-profile stamped frame geometry to decrease vehicle curb weight on the E160 platform.
    • Pressed Elastomeric Bushing Ref: RU-519 (Masuma tracking variant).
    • Ball Joint Compatibility Ref: MB-3602 (Features specialized dust boot configuration MO-2112). [1, 2]
3. Engineering Material & Layout Layout Specs
  • Structural Frame Shell: Robotic-welded heavy-gauge stamped carbon steel sheet matrix. [1]
  • Pivot Configuration: 3-Point multi-axis movement tracking (Inner front horizontal rubber bush, inner rear vertical trailing bush, and outer ball joint knuckle receptacle). [1]
  • Drivetrain Variance (2WD vs 4WD): 4WD platforms (NZE144G / NZE164G) utilize alternative bushing durometer tolerances along the inner sleeves to absorb transfer-case counter-shudder, despite sharing spatial geometries with FWD counterparts.[1, 2]

Toyota Nze Lower Control Arms

KSh4,000.00
Toyota Corolla NZE Series Front Lower Control Arm Technical Specifications
The front lower control arms for the Toyota Corolla NZE series (predominantly the NZE121 and NZE141 chassis generations, matching the 1.5L 1NZ-FE platform) utilize a conventional L-shaped MacPherson strut lower wishbone architecture. This assembly establishes a structural connection between the lower steering knuckle and the vehicle’s main engine subframe crossmember. [1, 2, 3]
1. E120 Generation NZE Series (Production 2000–2006)
  • Chassis Codes Covered: NZE121, ZZE122, CZE121 [1, 2]
  • Right Hand (RH) Front Lower Control Arm OE: 48068-20400 / 48068-12220 [1, 2]
  • Left Hand (LH) Front Lower Control Arm OE: 48069-20400 / 48069-12220 [1, 2]
  • Structural Material: Stamped structural carbon sheet steel. [1, 2]
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Pivot Sleeve (Inner Diameter): 14.2 mm (Matches M14 alignment fasteners).
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.5 mm
  • Pressed Elastomeric Sub-Components:
    • Small Front Bushing Ref: 48654-12120 / RU-357 (Dimensions: 14.2mm ID × 39.0mm OD × 59.0mm Length)
    • Large Rear Bushing Ref: 48655-12170 / RU-385 / TAB-026 (Dimensions: 14.5mm ID × 68.5mm OD × 60.0mm Length) [1]
  • Platform Sharing / Cross-Compatibility: Interchanges directly with the Toyota Allion/Premio (240 series), Toyota Wish (10 series), and the Toyota Matrix (ZZE130). [1, 2]
2. E140 Generation NZE Series (Production 2007–2012)
  • Chassis Codes Covered: NZE141 (Axio / Fielder variants) [1, 2]
  • Right Hand (RH) Front Lower Control Arm OE: 48068-12300 / 48068-12290 [1, 2]
  • Left Hand (LH) Front Lower Control Arm OE: 48069-12300 / 48069-12290 [1]
  • Component Weight: Approximately 3.15 kg per side assembly.
  • Bushing Internal Steel Sleeve Dimensions:
    • Forward Horizontal Pivot Sleeve (Inner Diameter): 14.2 mm
    • Rear Vertical Trailing Bush Sleeve (Inner Diameter): 14.4 mm
  • Pressed Elastomeric Sub-Components:
    • Small Front Bushing Ref: 48654-12150 / RU-494 (Dimensions: 14.2mm ID × 38.2mm OD × 61.0mm Length)
    • Large Rear Bushing Ref: 48655-12120 / RU-495 / TAB-145 (Dimensions: 14.4mm ID × 65.2mm OD × 55.0mm Length)
3. Structural Alignment & Geometry Overview
  • Mounting Interface Layout: 3-Point multi-axis tracking (Inner forward horizontal bushing + Inner rear vertical bush + Outer steering knuckle ball joint receiver flange).
  • Elastomeric Compound Type: High-durometer vulcanized natural rubber (NR) bonded inside steel backing sleeves. [1, 2, 3]

Nissan March Model K12 Lower Control Arm

KSh4,000.00
Core Geometric & Material Specifications
  • Suspension Type: Track Control Arm / Trailing Wishbone (Independent MacPherson Strut lower pivot locator).
  • Material Composition: Stamped Heavy-Duty Structural Sheet Steel.
  • Overall Length: 390 mm.
  • Overall Width: 375 mm.
  • Overall Height: 70 mm.
  • Axle Placement: Front Axle (Asymmetrical, side-specific Left/Right configuration). [1, 2, 3, 4]
Pre-Installed Bushing & Joint Data
  • Integrated Front Bushing: Cylindrical rubber-to-metal silent block sleeve bushing. [1]
  • Integrated Rear Bushing: Heavy-duty rubber damper pad bush.
    • Inner Diameter: 12 mm.
    • Outer Diameter: 58 mm.
    • Bushing Structural Length: 53 mm. [1, 2]
  • Ball Joint Configuration: Integrated press-fit ball joint assembly featuring a 16 mm tapered pin/stud sizing. [1]
Factory Hardware Fastener Torques
  • Front Bushing Horizontal Pivot Bolt: 114 Nm (84 ft-lbs).
  • Rear Bushing Vertical Pivot Bolt: 108 Nm (80 ft-lbs).
  • Ball Joint Knuckle Pinch Bolt: 29 Nm (21 ft-lbs).
  • Note on Installation: Fasteners anchoring the inner rubber bushes must only be torqued to final limits once the suspension is pre-loaded to vehicle ride height (approx. 36.5 cm hub-to-fender center) to eliminate binding and premature rubber failure. [1, 2, 3, 4]
Factory Reference & Cross-Identification
  • Nissan Genuine OEM Component Part Roots:
    • Right Hand (RH): 54500-AX600, 54500-BC40A.
    • Left Hand (LH): 54501-AX600, 54501-BC40A.
  • Major Aftermarket Technical Cross-References:
    • Delphi Reference: TC1308 (RH) / TC1307 (LH).
    • Lemförder Coding: 35847 01 (RH) / 35846 01 (LH).
    • Febest Reference: 0224-K12. [1, 2, 3, 4]

Mitsubishi Lancer Lower Control Arm

Original price was: KSh5,500.00.Current price is: KSh4,500.00.
Strong and reliable Ex-Japan Grade A lower control arm for Mitsubishi Lancer ensuring suspension stability and long-lasting performance.

Price: 4,500

 Compatibility: Mitsubishi Lancer (select models – confirm chassis code)

 Performance: Stable suspension movement, Reduced road vibration

Honda Airwave Lower Control Arms

Original price was: KSh6,000.00.Current price is: KSh4,500.00.
Durable Ex-Japan Grade A lower control arms for Honda Airwave providing stable suspension support and smooth ride quality.

Price: 4,500

Compatibility: Honda Airwave (2005–2010),Compatible with Honda Fit Aria (select models)

 Performance: Improved suspension stability,Better wheel alignment

Daihatsu Mira Lower Control Arms

Original price was: KSh6,000.00.Current price is: KSh4,000.00.

Daihatsu Mira Lower Control Arms 

Condition: Ex-Japan – Grade A, lightly used, fully tested for reliability and durability.
Compatibility: Perfectly designed for Daihatsu Mira ensuring OEM fit and smooth suspension performance.
Performance: Maintains precise wheel alignment, improves handling, and ensures stable, safe driving. Absorbs road shocks for better ride comfort.
Durability: Made with high-quality materials to resist wear, corrosion, and long-term usage.
Value: Affordable at 4000, delivering safety, control, and long-lasting performance for daily driving or rough road conditions.

2012 Swift Lower Control Arms

Original price was: KSh6,300.00.Current price is: KSh4,000.00.
  • Part: Front Lower Control Arm (Left/Right).

  • Condition: Grade A Ex-Japan (Used)

  • Compatibility: Fits Suzuki Swift models 2010–2017 (Chassis: ZC72S, ZD72S, ZC82S).

  • Components: Includes pre-fitted high-density bushings and heavy-duty ball joint.

  • Price: KSh 4,000

Showing 28 of 43 results
Please select your product
Product has been added to your cart
Compare (0)