Sort

Mazda CX5 Petrol Model 2016 Gearbox Mountain

KSh4,000.00
Part Numbers & Interchanges
  • OEM Part Numbers: GHR9-39-070, GHR9-39-070A, KD45-39-070A, KR11-39-070A
  • Aftermarket Cross-References: A4438, SKMA4438, 9813 [1, 2, 3]
Physical & Material Specifications
  • Mounting Type: Rubber-to-Metal Insulator Mount (Elastomer dampened, solid rubber core)
  • Chassis Bracket Material: Heavy-duty Stamped Steel / Cast Aluminum
  • Fitting Position: Left Front (Engine/Gearbox Left Side Bay, structurally positioned beneath the air intake box, ECU assembly, and battery tray)
  • Inner Bushing Diameter: 14 mm to 15 mm
  • Average Mount Width: 75 mm
  • Average Weight: Approx. 0.96 kg to 1.1 kg (insulator core only) [1, 2, 3, 4]
Installation Torque Specifications
  • Chassis Mounting Bolts (19mm socket): 131 – 153 N·m (96 – 113 lb-ft)
  • Transmission Mounting Nut (17mm socket): 54 – 62 N·m (40 – 45 lb-ft)
  • Long Main Support Through-Bolt (17mm socket): 81 – 99 N·m (60 – 73 lb-ft) [1]

Mazda CX5 Diesel Model 2018 Gearbox Mountain

KSh4,000.00
Part Numbers & Interchanges
  • OEM Part Numbers: K123-39-070A, K123-39-070, KD45-39-070A
  • Aftermarket Cross-References: U9813, TED40312, TED98369 [1, 2]
Physical & Material Specifications
  • Mounting Type: Rubber-to-Metal Insulator Mount (Elastomer dampened structural support)
  • Chassis Bracket Material: Heavy-duty Cast Aluminum / Stamped Steel
  • Fitting Position: Left Front / Rear Left (Engine/Gearbox Left Side Bay, structurally positioned beneath the battery tray and ECU assembly)
  • Inner Bushing Diameter: 14 mm to 15 mm
  • Average Weight: Approx. 1.2 kg to 1.4 kg (complete assembly) [1, 2]
Installation Torque Specifications
  • No. 4 Engine Mount Bracket Installation Nuts (Main Frame): 92 – 116 N·m (68 – 85 lb-ft)
  • Transaxle Stud Bolts: 15 – 25 N·m (12 – 18 lb-ft)
  • Chassis Alignment Bolts (19mm socket): 131 – 153 N·m (96 – 113 lb-ft)
  • Transmission Mounting Nut (17mm socket): 54 – 62 N·m (40 – 45 lb-ft)
  • Long Main Support Through-Bolt (17mm socket): 81 – 99 N·m (60 – 73 lb-ft) [1]

Mazda CX5 Diesel Model 2017 Gearbox Mountain

KSh4,000.00
Part Numbers & Interchanges
  • OEM Part Numbers: K123-39-070A, K123-39-070, KD45-39-070A
  • Aftermarket Cross-References: TED40312, TED98369 [1, 2, 3]
Physical & Material Specifications
  • Mounting Type: Rubber-to-Metal Insulator Mount (Elastomer dampened structural mount)
  • Chassis Bracket Material: Heavy-duty Cast Aluminum / Stamped Steel
  • Fitting Position: Left Front / Rear Left (Engine/Gearbox Left Side Bay, structurally positioned beneath the battery tray and ECU assembly)
  • Inner Bushing Diameter: 14 mm to 15 mm
  • Average Weight: Approx. 1.2 kg to 1.4 kg (complete assembly) [1, 2, 3]
Installation Torque Specifications
  • No. 4 Engine Mount Bracket Installation Nuts (Main Frame): 92 – 116 N·m (68 – 85 lb-ft)
  • Transaxle Stud Bolts: 15 – 25 N·m (12 – 18 lb-ft)
  • Chassis Alignment Bolts (19mm assembly variant): 131 – 153 N·m (96 – 113 lb-ft)
  • Transmission Mounting Nut / Support Bolt: 54 – 62 N·m (40 – 45 lb-ft) [1, 2]

Mazda CX5 Diesel Model 2016 Gearbox Mountain

KSh4,000.00
Part Numbers & Interchanges
    • OEM Part Numbers: GHR9-39-070, GHR9-39-070A, KD45-39-070A, KR11-39-070A
    • Aftermarket Cross-References: A4438, SKMA4438, 9813 [1, 2, 3, 4]
Physical & Material Specifications
    • Mounting Type: Rubber-to-Metal Insulator Mount (Solid/Elastomer dampened)
    • Chassis Bracket Material: Heavy-duty Stamped Steel / Cast Aluminum
    • Fitting Position: Left Front (Engine/Gearbox Left Side Bay, underneath the battery tray/ECU assembly)
    • Inner Bushing Diameter: 14 mm to 15 mm
    • Average Mount Width: 75 mm
    • Average Weight: Approx. 0.96 kg to 1.1 kg (insulator core only) [1, 2, 3]
Installation Torque Specifications
  • Chassis Mounting Bolts (19mm socket): 131 – 153 N·m (96 – 113 lb-ft)
  • Transmission Mounting Nut (17mm socket): 54 – 62 N·m (40 – 45 lb-ft)
  • Long Main Support Through-Bolt (17mm socket): 81 – 99 N·m (60 – 73 lb-ft) [1]

Mazda CX5 Diesel Model 2015 Gearbox Mountain

KSh4,000.00
Part Numbers & Interchanges
    • OEM Part Numbers: GHR9-39-070, GHR9-39-070A, KD45-39-070A, KR11-39-070A
    • Aftermarket Cross-References: A4438, SKMA4438, 9813 [1, 2, 3]
Physical & Material Specifications
    • Mounting Type: Rubber-to-Metal Insulator Mount (Elastomer dampened)
    • Chassis Bracket Material: Heavy-duty Stamped Steel / Cast Aluminum
    • Fitting Position: Left Front (Engine/Gearbox Left Side Bay, beneath the battery tray/ECU assembly)
    • Inner Bushing Diameter: 14 mm to 15 mm
    • Average Mount Width: 75 mm
    • Average Weight: Approx. 0.96 kg to 1.1 kg (insulator core only) [1, 2, 3, 4, 5, 6]
Installation Torque Specifications
  • Chassis Mounting Bolts (19mm socket): 131 – 153 N·m (96 – 113 lb-ft)
  • Transmission Mounting Nut (17mm socket): 54 – 62 N·m (40 – 45 lb-ft)
  • Long Main Support Through-Bolt (17mm socket): 81 – 99 N·m (60 – 73 lb-ft) [1]

Mazda CX5 Model 2015 Gearbox Mountain

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The 2015 Mazda CX-5 utilizes a multi-point SkyActiv powertrain isolation layout, relying on two distinct mounting components directly responsible for holding and stabilizing the gearbox assembly:
  • Left-Hand Gearbox Mount (Transmission Main Insulator):
    • OEM Part Numbers: BJS7-39-070 / GHR9-39-070B / KD47-39-070
    • Function: Primary weight-bearing insulator for the transmission housing. It fastens the gearbox structural casing to the left frame rail to isolate high-frequency driveline harmonics. [1]
  • Rear Torque Strut Mount (Lower "Dog-Bone" Roll Stopper):
    • OEM Part Numbers: KF59-39-040A / KD45-39-040
    • Function: Drivetrain pitch control arm. Anchors the rear lower transmission casing directly to the front suspension cross-member subframe to prevent back-and-forth movement under heavy acceleration or shifting. [1, 2]
2. Vehicle Structural Fitment
  • Engine & Gearbox Alignment: Transverse configuration (East-West installation)
  • Chassis Series Covered: Mazda CX-5 (KE Platform / First Gen Pre-facelift & Facelift crossover periods). [1, 2]
  • Powertrain Compatibility:
    • 2.0L SkyActiv-G paired with the 6-speed manual (SKYACTIV-MT) or 6-speed automatic (SKYACTIV-Drive).
    • 2.5L SkyActiv-G paired with the 6-speed automatic.
    • 2.2L SkyActiv-D (Twin-Turbo Diesel global variants). [1, 2, 3, 4]
  • Drivetrain Adaptability: Identical mounting geometry handles both Front-Wheel Drive (FWD) and All-Wheel Drive (AWD) intelligent subframe layouts. [1]
3. Material Specifications
  • Structural Composition: Laser-cut, stamped high-tensile structural steel combined with cast aluminum frame adapters.
  • Damping Material: Heavy-duty vulcanized natural rubber (NBR-metal bonded matrix).
  • Damping Classification: Passive elastomeric design. The left transmission side features a solid-core rubber cushion block specifically calibrated to isolate SkyActiv-Drive torque converter lockup frequencies. [1, 2, 3]
4. Standard Factory Torque Specifications
  • Main Transmission Mount-to-Chassis Frame Bolts: ~62 Nm to 80 Nm (approx. 45 to 59 ft-lbs)
  • Transmission Mount-to-Gearbox Bracket Center Nut: ~85 Nm to 100 Nm (approx. 62 to 74 ft-lbs)
  • Rear Torque Strut Lower Subframe Cross-bolt: ~90 Nm (approx. 66 ft-lbs)

Mazda Demio Model 2018 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm (Note: Certain unbracketed aftermarket replacements indicate up to 422 mm across extended geometric measurement points).
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Factory-fitted original equipment measures 16 mm, though some heavy-duty replacement matrices use a 17.5 mm variant).
  • Fitting Configuration Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-350B, DA6A-34-350C, DB2R-34-350
    • Major Aftermarket Match: Delphi TC3286
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-300B, DA6A-34-300C, DB2R-34-300
    • Major Aftermarket Match: Delphi TC3287
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer.
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot.
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (DBA-DJ3FS, DBA-DJ3AS 4WD, 3BA-DJLFS, 5BA-DJLFS, DJ5FS, DJ5AS).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT / P5-VPS), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (North American variants derived from the Mazda DJ platform partnership).

Mazda Demio Model 2017 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm (Note: Certain unbracketed aftermarket replacements indicate up to 422 mm across extended geometric points). [1]
  • Total Component Height: 82 mm [1]
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Some heavy-duty premium replacement matrices specify a 17.5 mm cone variant; standard factory factory-fitted OE measures 16 mm). [1]
  • Fitting Configuration Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-350B, DA6A-34-350C, DA7H-34-350
    • Major Aftermarket Match: Delphi TC3286 [1, 2]
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA7H-34-300B, D23H-34-300, DA6A-34-300C
    • Major Aftermarket Match: Delphi TC3287 [1, 2]
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer.
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (DBA-DJ3FS, DBA-DJ3AS 4WD, DJ5FS, DJ5AS).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership). [1, 2]

Mazda Demio Model 2016 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track profile)
  • Ball Joint Cone/Pin Diameter: Ø 16 mm (Note: Certain reinforced aftermarket replacement matrices utilize a 17.5 mm variant; standard factory OE specification measures 16 mm).
  • Thread Size / Fitting Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm [1, 2, 3]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-350C, DA7H-34-350, D201-34-350B
    • Major Aftermarket Match: Delphi TC3286 [1]
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-300C, DA7H-34-300B, D23H-34-300
    • Major Aftermarket Match: Delphi TC3287 [1, 2, 3]
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped steel alloy structural matrix finished with an anti-corrosion black powder layer. [1, 2]
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness). [1]
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (CBA-DJLFS, DBA-DJ3FS, DJ5FS, DJ5AS 4WD).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership).

Mazda Demio Model 2015 Lower Control Arm

KSh5,500.00
1. Dimensional & Sizing Specifications
  • Total Component Length: 350 mm
  • Total Component Height: 82 mm
  • Component Width: ~50 mm (at base structural track)
  • Ball Joint Cone/Pin Size: Ø 16 mm
  • Thread Size / Fitting Type: Pinch Bolt alignment configuration (16 mm)
  • Inner Bushing Bolt Hole Diameter: 10.4 mm [1, 2]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH):
    • Mazda Original Equipment (OE) Codes: DA6A-34-350C, D201-34-350B, DA7H-34-350
    • Major Aftermarket Match: Delphi TC3286 [1, 2]
  • Right-Hand Side (RH):
    • Mazda Original Equipment (OE) Codes: D23H-34-300, DA7H-34-300B, D201-34-300B
    • Major Aftermarket Match: Delphi TC3287 [1, 2, 3, 4]
3. Material & Component Architecture
  • Structural Material: High-tensile forged or stamped carbon steel alloy finished with an anti-corrosion black powder layer. [1, 2]
  • Pre-Assembled Bushings: Premium vulcanized natural rubber silent-block bushings (one forward cylindrical pivot bushing and one large rear compliance load bushing) engineered to minimize cabin NVH (Noise, Vibration, and Harshness). [1]
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed, pre-greased low-friction ball joint enclosed in a flexible neoprene protective dust boot. [1]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Mazda Demio / Mazda 2 Hatchback and Sedan (CBA-DJLFS, DBA-DJ3FS, DJ5FS, DJ5AS 4WD).
  • Powertrain Compatibility: 1.3L SkyActiv-G (P3-VPS), 1.5L SkyActiv-G (F5-VPT), and 1.5L SkyActiv-D Diesel (S5-DPTS).
  • Platform Sharing: Shared geometric subframe attachment layout with the Toyota Yaris / Yaris iA (2016+ North American variants derived from the Mazda DJ platform partnership). [1, 2]

Nissan Note Model E12 Engine Mounting

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The E12 platform utilizes a three-point suspended engine containment setup designed to isolate the low-frequency vibrations typical of 3-cylinder powertrains:
  • Right-Hand Engine Mount (Front Right / Timing Side):
    • OEM Part Numbers: 11210-3HD3A, 11210-3HD0A
    • Function: Primary weight-bearing insulator. It secures the engine block to the right-hand chassis frame rail and absorbs primary engine harmonics. [1, 2]
  • Left-Hand Transmission Mount (Front Left / Gearbox Side):
    • OEM Part Numbers: 11220-3HD2A, 11360-1HC3C
    • Function: Gearbox casing insulator. It bears the weight of the transmission case, counteracting drivetrain movement during deceleration and CVT ratio adjustments. [1]
  • Rear Torque Rod (Lower Engine Stabilizer / "Dog-Bone" Mount):
    • OEM Part Numbers: 11360-1HC0A, 11360-1HC0D
    • Function: Lower restriction link. It fastens the rear of the transmission casing directly to the lower subframe cross-member to suppress the rotational "pitching" or rocking motion of the engine during acceleration. [1, 2]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • DBA-E12 (2WD): 1.2L 3-cylinder naturally aspirated (HR12DE) or 1.2L 3-cylinder supercharged (HR12DDR)
    • DBA-NE12 (4WD): 1.2L 3-cylinder Petrol variants
    • HE12 (e-POWER): 1.2L HR12DE paired with the EM57 electric motor generation system [1, 2]
  • Platform Sharing Interchangeability: The engine mounts directly match the mounting layout used on the Nissan March / Micra (K13) and the Nissan Latio (N17) platforms. [1, 2]
3. Material Specifications
  • Material Composition: Specially treated, high-absorption vulcanized natural rubber chemically bonded to stamped structural carbon steel base plates and cast aluminum brackets.
  • Damping Classification: Standard solid-core high-damping elastomeric design (passive configuration) optimized to target secondary-order idle frequencies.
4. Standard Installation Torque Specifications
  • Right-Hand Mount-to-Chassis Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Right-Hand Mount-to-Engine Bracket Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Left-Hand Mount-to-Gearbox Casing Stud/Nut: ~62 Nm to 80 Nm (approx. 45 to 59 ft-lbs)
  • Rear Lower Torque Rod Bracket Bolts: ~80 Nm (approx. 59 ft-lbs) [1, 2, 3]

Nissan Note Beam Model E12

KSh20,000.00
1. Structural Geometry & Alignment Specs
The E12 platform utilizes a semi-independent rear suspension layout with a semi-rigid twist profile:
  • Suspension Architecture Type: Torsion Beam / Twist Beam Axle with trailing arms. [1, 2]
  • Rear Track Width: 1,485 mm (standard variants). [1, 2]
  • Wheelbase Compatibility: 2,600 mm. [1, 2]
  • Brake Integration Interface: Formed with integral backing plates designed to accept factory 203 mm hydraulic drum brake units or specialized solid disc calipers (market/trim dependent). [1, 2]
  • Stabilizer Element: Built with an integrated inner anti-roll sway bar welded directly inside the V-shape profile of the torsion beam structure to control body roll.
2. OEM Part Numbers & Drive Layouts
  • Standard Front-Wheel Drive Layout (2WD / 4x2 / FF):
    • Nissan Original Equipment (OE) Codes: 55501-3VA0A, 55501-3VA0B, 55501-5WH0A [1]
  • All-Wheel Drive / Four-Wheel Drive Layout (4WD / 4x4 / e-POWER 4WD):
    • Nissan Original Equipment (OE) Code: 55501-3VE1B [1]
  • Matching Rear Pivot Axle Bushing Code: 55045-1HJ0A [1]
3. Material & Component Composition
  • Material Matrix: High-tensile cold-stamped structural spring steel with variable wall thickness for progressive roll rigidity.
  • Mounting Interface: Dual forward-facing eyelets carrying pre-pressed vulcanized natural rubber silent-block compliance bushings.
  • Coil Spring Mount Geometry: Dual welded structural lower spring seats configured for linear-rate coil springs and single-tube vertical dampening shock absorbers. [1]
4. Vehicle Platform Alignment
  • Chassis Series Covered: Nissan Note (DBA-E12, DBA-NE12 4WD, HE12 e-POWER).
  • Powertrain Mating: HR12DE (1.2L 3-cylinder), HR12DDR (1.2L Supercharged), and HR12DE-EM57 (e-POWER Hybrid systems). [1, 2, 3]

Nissan Cube Lower Arms

KSh4,000.00
1. Dimensional & Sizing Specifications
  • Ball Joint Cone/Pin Diameter:
    • Z11 Platform (2002–2008): Ø 16 mm [The Nissan Note Z11 shares this spec with the K12 Micra/E11 Note].
    • Z12 Platform (2008–2020): Ø 18 mm [Upgraded to match the C11 Tiida/NV200 standard for a wider wheel track].
  • Bushing Bolt Hole Diameters: 12 mm (Main subframe pivot alignment points)
  • Average Assembly Weight: ~2.25 kg to 2.40 kg per arm (dependent on platform width)
2. OEM Part Numbers & Cross-References
  • Z11 Generation (2002–2008 / B-Platform):
    • Left-Hand Side (LH): 54501-AX000, 54501-14B0A
    • Right-Hand Side (RH): 54500-AX000, 54500-14B0A
    • Aftermarket Matches: Delphi TC1307 (LH) / Delphi TC1308 (RH)
  • Z12 Generation (2008–2020 / B-Lounge Platform):
    • Left-Hand Side (LH): 54501-1FU0A, 54501-ED000, 54501-EE50A
    • Right-Hand Side (RH): 54500-1FU0A, 54500-ED000, 54500-ED00A
    • Aftermarket Matches: Delphi TC2873 (LH) / Delphi TC2874 (RH)
3. Material & Component Architecture
  • Structural Composition: Heavy-gauge stamped sheet steel matrix frame finished in an anti-corrosion black protective coating.
  • Pre-Installed Bushings: High-damping vulcanized natural rubber silent-block bushings (one small horizontal pivot bushing at the front position, one large vertical compliance cylindrical bushing at the rear position).
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed and pre-greased low-friction ball joint integrated with a neoprene protective dust boot.
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Nissan Cube (BZ11, BNZ11, YZ11, Z12, NZ12).
  • Engine Alignment: 1.4L (CR14DE), 1.5L (HR15DE), 1.6L (HR16DE), 1.8L (MR18DE).
  • Platform Interchangeability:
    • Z11 arms directly swap with the Nissan March/Micra (K12) and Nissan Note (E11).
    • Z12 arms directly swap with the Nissan Tiida (C11), NV200 (M20), and Wingroad (Y12).

Nissan NV200 Lower Arms

KSh4,000.00
1. Dimensional & Sizing Specifications
  • Ball Joint Cone/Pin Diameter: Ø 18 mm
  • Ball Joint Body Diameter (Press-fit size): Ø 38.5 mm
  • Bushing Bolt Hole Diameters: 12 mm (Main frame pivot points)
  • Total Component Length: 540 mm
  • Total Component Width: 280 mm
  • Total Component Height: 80 mm
  • Average Assembly Weight: ~2.45 kg per side [1, 2]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH / Driver Side or Passenger depending on market):
    • Nissan Original Equipment (OE) Codes: 54501-EL000, 54501-3SH2A, 54501-9AM1A, 54501-9AM1B
    • Major Premium Aftermarket Match: Delphi TC2496 [1, 2]
  • Right-Hand Side (RH):
    • Nissan Original Equipment (OE) Codes: 54500-EL000, 54500-3SH2A, 54500-3SH2B, 54500-9AM1A, 54500-9AM1B
    • Major Premium Aftermarket Match: Delphi TC2497 [1, 2, 3]
3. Material & Component Architecture
  • Structural Composition: Heavy-duty stamped structural sheet steel or cast steel matrix shell, designed to withstand commercial van payload distributions. [1, 2, 3]
  • Pre-Installed Bushings: High-damping vulcanized natural rubber silent-block bushings (one horizontal inner pivot bushing, one vertical large compliance rear cylindrical bushing). [1, 2]
  • Ball Joint Mechanism: Maintenance-free, non-adjustable, factory-sealed and pre-greased low-friction ball joint integrated with a durable neoprene dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Nissan NV200 Van / Combi / Evalia Bus (M20, M20M).
  • Engine Variant Alignment: 1.5L dCi (K9K), 1.6L (HR16DE), 2.0L (MR20DE).
  • Platform Sharing Interchangeability: Built on a modified variant of the global Nissan B-platform. The tracking arm architecture directly shares subframe layout points with the Nissan Tiida (C11), Bluebird Sylphy (G11), and Wingroad (Y12).

Nissan Note E11 Lower Arms

KSh4,000.00
1. Dimensional & Sizing Specifications
  • Ball Joint Cone/Stud Diameter: Ø 16 mm
  • Bushing Bolt Hole Inner Diameters: 12 mm (mounts to the subframe via 18 mm bolt heads)
  • Component Length: ~383 mm to 390 mm
  • Component Width: ~365 mm to 375 mm
  • Average Assembly Weight: ~2.25 kg to 2.37 kg per side [1, 2, 3, 4]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH / Passenger Side in RHD markets):
    • Nissan Original Equipment (OE) Codes: 54501-AX000, 54501-9U00A, 54501-BC40A
    • Major Premium Aftermarket Match: Delphi TC1307 [1, 2]
  • Right-Hand Side (RH / Driver Side in RHD markets):
    • Nissan Original Equipment (OE) Codes: 54500-AX000, 54500-9U00A, 54500-BC40A
    • Major Premium Aftermarket Match: Delphi TC1308 [1]
  • Standalone Replacement Ball Joint Code (Pressed-In Type): 40160-AX000 [1]
3. Material & Component Architecture
  • Structural Composition: Heavy-duty stamped sheet steel (matrix shell format) painted with an anti-corrosion protective layer. [1, 2]
  • Pre-Assembled Bushings: Two high-damping natural rubber silent-block bushings per arm (one small horizontal pivot bushing at the front position, one large vertical compliance cylindrical bushing at the rear position). [1, 2]
  • Ball Joint Mechanism: Maintenance-free, factory-sealed, pre-greased low-friction ball joint integrated with a neoprene protective dust boot. [1, 2]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Nissan Note (E11 / NE11 4WD variant).
  • Engine Alignment: 1.4L (CR14DE), 1.5L dCi (K9K), and 1.6L (HR16DE).
  • Platform Sharing Interchangeability: Built on the global Nissan B-platform architecture. The track control arm dimensions directly match and swap with the Nissan March/Micra (K12), Nissan Cube (Z11), and select Renault platform cousins like the Clio III. [1, 2, 3]

Nissan Tiida Lower Arms

KSh4,000.00
1. Dimensional & Sizing Specifications
  • Ball Joint Cone/Stud Size: Ø 18 mm
  • Bushing Inner Bore Diameter: 12 mm
  • Total Component Length: 510 mm
  • Total Component Width: 235 mm
  • Total Component Height: 62 mm
  • Average Assembly Weight: ~2.3 kg to 2.35 kg per side [1, 2, 3, 4]
2. OEM Part Numbers & Cross-References
  • Left-Hand Side (LH / Driver Side or Passenger depending on market alignment):
    • Nissan Original Equipment (OE) Codes: 54501-ED000, 54501-EL000, 54501-EE50A, 54501-1FU0A [1, 2]
  • Right-Hand Side (RH):
    • Nissan Original Equipment (OE) Codes: 54500-ED000, 54500-EL000, 54500-1FU0A, 54500-ED00A [1, 2]
  • Major Premium Aftermarket Matches:
    • Delphi: TC2873 (LH) / TC2874 (RH)
    • A.B.S. Electronics/Mechanical: 211511 [1, 2]
3. Material & Component Architecture
  • Structural Material: High-strength heavy-gauge stamped sheet steel (welded matrix frame structure).
  • Pre-Installed Bushings: High-durability vulcanized natural rubber silent-block bushings (one horizontal pivot bush, one vertical rear compliance bush).
  • Ball Joint Setup: Non-adjustable, pre-greased, sealed low-friction heavy-duty ball joint assembly with integrated neoprene dust boot. [1, 2, 3, 4]
4. Vehicle & Platform Fitment Geometry
  • Chassis Codes Covered: Nissan Tiida Hatchback / Sedan (C11, C11X, SC11, C12).
  • Engine Variant Alignment: 1.5L (HR15DE), 1.6L (HR16DE), 1.8L (MR18DE).
  • Platform Sharing: Completely interchangeable with the Nissan Wingroad (Y12), Bluebird Sylphy (G11), NV200 (M20), and Nissan Cube (Z12) front suspension subframe geometry. [1, 2, 3, 4]

Daihatsu Mira Engine Mountain

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The Daihatsu Mira relies on a 3-piece multi-point containment setup optimized to counteract the low-frequency vibrations typical of 3-cylinder engines:
  • Right-Hand Mount (Front Right / Timing Belt Side):
    • OEM Part Numbers: 12305-B2210, 12305-B2140, or 12305-B2040 (depending on chassis platform)
    • Function: Primary weight-bearing insulator. Anchors the structural block to the right engine bay frame rail. [1, 2]
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B2080 or 12306-B2035
    • Function: Gearbox casing insulator. It isolates transaxle load shifts and rotational transmission torque. [1, 2, 3]
  • Rear Roll Stopper (Lower Center Torque Rod):
    • OEM Part Numbers: 12329-B2070, 12361-B7206, or 12373-B7203
    • Function: Moving control torque rod. It connects the transmission housing directly to the lower firewall cross-member or subframe to restrict back-and-forth rotational pitching. [1, 2, 3, 4]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West layout)
  • Chassis & Powertrain Compatibility:
    • L275S / L285S Series: 0.66L 3-cylinder Petrol (KF-VE / KF-DET), FWD/AWD
    • L276 Series: 1.0L 3-cylinder Petrol (1KR-FE), FWD
    • LA300S / LA310S (Mira e:S): 0.66L Eco-Idle Petrol (KF-VE3), FWD/AWD [1, 2]
3. Material & Damping Specifications
  • Material Composition: Natural vulcanized rubber chemically bonded to stamped structural steel, reinforced cast aluminum casings, and iron framing brackets. [1]
  • Damping Classification:
    • Right-Hand Position: Specially engineered Hydraulic Design (Hydro-Mount) containing internal fluid to absorb the rough secondary-order idle harmonics inherent to light 3-cylinder setups.
    • Left and Rear Positions: Standard solid-core rubber-metal elastomeric bushings.

Honda Fit Model 2012 Gearbox Mountain

KSh3,500.00
1. Component Breakdown & OEM Part Numbers
The 2012 Honda Fit utilizes a multi-point engine and transmission isolation configuration:
  • Left-Hand Gearbox Mount (Transmission Main Insulator):
    • Automatic / CVT Transmission (GE6 / GE8 standard): 50850-TF0-981 (or 50850-TF0-J81)
    • Manual Transmission: 50850-TF0-G01
    • Function: Primary weight-bearing insulator for the transmission housing. Connects the gearbox directly to the left frame rail.
  • Transmission Rear Torque Strut Mount (Lower Dog-Bone Mount):
    • Part Number: 50890-TF0-911 (or 50890-TF0-981)
    • Function: Controls the back-and-forth structural "pitching" and rotational torque twist of the transmission assembly under acceleration and deceleration.
2. Vehicle Structural Fitment
  • Engine & Gearbox Orientation: Transverse (East-West installation)
  • Chassis & Drivetrain Compatibility:
    • GE6: 1.3L L13A I4 Petrol engine, paired with CVT or 5-speed Automatic
    • GE8: 1.5L L15A I4 Petrol engine, paired with 5-speed Manual, 5-speed Automatic, or CVT
    • GP1: 1.3L LDA I4 Hybrid (Fit Hybrid), paired with CVT
3. Material Specifications
  • Composition: Premium vulcanized natural rubber formulation bonded directly to stamped carbon steel casing brackets.
  • Design Type: Fluid-filled hydraulic design (hydro-mount) for the main left-hand transmission insulator to absorb severe high-frequency CVT/Automatic harmonic vibrations; solid rubber bushing for the lower rear torque rod.

Suzuki Alto Model 2018 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Friction Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Working Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Overall Thickness): 63.0 mm
  • Centering / Center Bore Diameter: 52.1 mm [1]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (Standard Japanese Domestic Market HA36 platform code), 43511-68K00 / 43511-76G50 [1, 2]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263
    • Maxgear: 19-2625 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle Only
  • Material Composition: High-thermal cast grey alloy iron
  • Design Type: Integral wheel hub carrier assembly casing (machined outer shell containing the inner hub profile, structurally designed without pre-pressed wheel bearings or pre-fitted wheel studs).
  • Braking System Type: Mechanical leading-trailing shoe setup activated by a dual-piston hydraulic rear wheel cylinder.[1, 2]

Suzuki Alto Model 2017 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Friction Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Working Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Overall Thickness): 63.0 mm
  • Centering / Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2, 3, 4]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Hole Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (HA36 platform standard), 43511-68K00 / 43511-76G50 (Cross-over compatibility codes) [1, 2]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle Only
  • Material Composition: High-thermal cast grey alloy iron.
  • Design Type: Integral wheel hub carrier assembly casing (machined outer shell containing the inner hub profile, structurally designed without pre-pressed wheel bearings or pre-fitted wheel studs).
  • Braking System Type: Mechanical leading-trailing shoe setup activated by a hydraulic rear wheel cylinder.

Suzuki Alto Model 2016 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Depth: 35.0 mm
  • Total Component Height (Thickness): 63.0 mm
  • Centering/Center Bore Diameter: 52.0 mm to 52.1 mm [1, 2]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1, 2]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Codes: 43511-74P00 (Main code for HA36 platform), 43511-76G50 / 43511-68K00 (GF platform cross-over) [1, 2, 3]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709 or ADK84713
    • TRW: DB4424
    • Bosch: 0 986 477 263 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle
  • Design Type: Integral wheel hub carrier assembly casing (cast high-thermal grey alloy iron structure without wheel bearings/studs pre-pressed).
  • Braking System Type: Mechanical leading-trailing drum configuration expanding outward via dual-piston rear hydraulic brake cylinders. [1, 2, 3]

Suzuki Alto Model 2015 Rear Drum

KSh6,500.00
1. Dimensional Specifications
    • Inner Drum Diameter (Working Surface): 180.0 mm
    • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
    • Outer Brake Drum Diameter: 208.0 mm
    • Inner Brake Drum Width / Depth: 35.0 mm
    • Total Component Height (Thickness): 63.0 mm
    • Centering/Center Bore Diameter: 52.0 mm [1]
2. Wheel Lug Bolt Pattern & Mounting
    • Number of Holes: 4 holes
    • Pitch Circle Diameter (PCD): 4 x 100 mm
    • Hub Bolt Circle (Bore) Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
    • Suzuki Original Equipment (OE) Numbers: 43511-76G50, 43511-76G00, 43511-72M00 [1, 2]
    • Major Premium Aftermarket Matches:
        • Blue Print: ADK84709
        • TRW: DB4304B
        • A.B.S.: 2755-S [1]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle
  • Design Type: Integrated drum assembly designed with an inner cavity to accept the rear wheel bearing unit setup.
  • Braking System Type: Leading-trailing drum brake configuration, driven by dual-piston rear wheel hydraulic cylinders.[1, 2, 3]

Suzuki Alto Model 2014 Rear Drum

KSh6,500.00
1. Dimensional Specifications
  • Inner Drum Diameter (Working Surface): 180.0 mm
  • Maximum Wear/Reboring Limit (Discard Diameter): 182.0 mm
  • Outer Brake Drum Diameter: 208.0 mm
  • Inner Brake Drum Width / Depth: 34.6 mm to 35.0 mm
  • Total Component Height (Depth): 63.0 mm
  • Centering/Center Bore Diameter: 52.0 mm [1, 2]
2. Wheel Lug Bolt Pattern & Mounting
  • Number of Holes: 4 holes
  • Pitch Circle Diameter (PCD): 4 x 100 mm
  • Bore Diameter: 12.0 mm [1]
3. OEM Part Numbers & Cross-References
  • Suzuki Original Equipment (OE) Numbers: 43511-76G00, 43511-76G50 [1]
  • Major Premium Aftermarket Matches:
    • Blue Print: ADK84709
    • Delphi: BF584
    • Ridex: 123B0045 [1, 2]
4. Architecture & Engineering Layout
  • Drivetrain Position: Rear Axle only.
  • Design Type: Integral wheel hub design (the brake drum casing houses the outer wheel hub, built to fit directly over the rear spindle setup).
  • Braking System Type: Standard dual-circuit hydraulic drum brake utilizing leading and trailing brake shoe architecture.

Nissan Xtrail Model NT31 Rear Wheel Hub Bearing

KSh7,000.00
1. Dimensional & Structural Specifications
The NT31 chassis (specifically the 4WD variant) utilizes a complete, integrated wheel hub and bearing assembly (Generation 3 hub unit): [1]
  • Inner Diameter (Spindle Fitment): 26 mm
  • Outer Diameter (Hub Flange): 91 mm (bearing outer diameter) / 147 mm (total flange outer diameter)
  • Total Assembly Height: 94.5 mm
  • Spline/Teeth Count (Drive Axle Entry): 25 teeth (Note: Some aftermarket cross-references measure 24 teeth depending on the exact CV axle manufacturer match, but factory NT31 4WD standard is 25 teeth).
  • Wheel Lug Bolt Pattern: 5 holes / Mounting bores (5 x 114.3 mm Pitch Circle Diameter) [1, 2, 3]
2. OEM Part Numbers & Cross-References
  • Nissan Original Equipment (OE) Codes: 43202-JG200, 43202-JG000, 43202-4BA0B [1, 2]
  • Major Premium Aftermarket Matches:
    • NSK: 53BWKH20
    • SKF: VKBA 3997
    • FAG: 713 6138 10 [1]
3. Material, Sensor & Component Architecture
  • Bearing Construction: Double-row angular contact ball bearing pre-packed with heavy-duty, high-temperature lithium-based grease.
  • ABS Integration: Includes an integrated magnetic encoder ring/tone wheel embedded within the inner oil seal to interface directly with the vehicle’s anti-lock braking system sensor.
  • Sealing: Double-lip rubber contact seals (NBR/Nitrile) on both faces to prevent moisture and road debris contamination.[1]

Toyota Passo Model 2017 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2017 model utilizes a revised three-point engine containment layout optimized for the newer high-efficiency powertrain:
  • Right-Hand Mount (Front Right / Engine Side):
    • OEM Part Numbers: 12305-B1140 / 12305-B1220
    • Function: Primary weight-bearing stabilizer. It anchors the cylinder block to the right body rail frame and absorbs structural engine vibration.
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B1130 / 12306-B1131
    • Function: Gearbox casing insulator. It isolates noise and absorbs shifting torque from the Continuous Variable Transmission (CVT).
  • Rear Torque Rod (Lower Engine Stabilizer):
    • OEM Part Numbers: 12309-B1080 (Rod) and 12321-B1050 / 12321-B1070 (Bracket)
    • Function: Lower control torque rod. Connects directly to the front suspension cross-member to limit back-and-forth structural rocking during acceleration and deceleration.
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West layout)
  • Chassis & Powertrain Compatibility:
    • M700A: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
    • M710A: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
3. Material Specifications
  • Core Material: Heavy-duty vulcanized natural rubber formulation chemically bonded to a lightweight, reinforced cast aluminum casing and stamped steel base bracket assembly.
  • Damping Classification: Passive, solid-core high-absorption elastomeric system tailored to control 3-cylinder idle harmonics.

Toyota Passo Model 2012 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2012 model features a structural, multi-point isolation configuration split into three key positions to absorb vibration:
  • Right-Hand Mount (Front Right / Engine Side):
    • OEM Part Numbers: 12305-B1050 / 12305-B1051 / 12305-B1052
    • Function: Weight-bearing insulator assembly. Anchors the primary engine block structure to the right chassis frame rail. [1]
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B1030 / 12306-B1050
    • Function: Transmission casing insulator. Controls rotational torque loads generated through the drivetrain and transaxle.
  • Rear Torque Rod (Lower Engine Stabilizer):
    • OEM Part Numbers: 12309-B1060 (Rod Assembly) and 12321-B1040 (Mounting Bracket)
    • Function: Control link rod. Mounted directly to the vehicle lower cross-member subframe to constrain back-and-forth structural "rocking" or pitching during sudden throttle inputs. [1, 2]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
    • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
    • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2, 3]
3. Material Specifications
  • Core Material: Vulcanized natural rubber compound bonded to a stamped carbon steel and reinforced iron casting frame casing.
  • Damping Classification: Standard solid-core passive elastomeric rubber setup.

Toyota Passo Model 2013 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2013 model employs a multi-point containment design to manage powertrain vibration, divided into three core positions: [1, 2]
    • Right-Hand Mount (Engine Side):
        • OEM Part Numbers: 12305-B1080 / 12305-B1050 / 12305-B1100
        • Function: Primary weight-bearing insulator assembly. Supports the cylinder block casing and dampens structural vibrations. [1, 2]
    • Left-Hand Mount (Gearbox / Transmission Side):
        • OEM Part Numbers: 12306-B1050 / 12306-B1080
        • Function: Gearbox housing insulator. Absorbs longitudinal and lateral loads generated during gear changes or CVT ratio shifts. [1, 2]
    • Rear Torque Rod (Lower Stabilization Link):
        • OEM Part Numbers: 12309-B1060 (Rod) and 12321-B1040 (Rear Bracket)
        • Function: Moving control torque rod. Attaches directly to the lower subframe to limit back-and-forth structural "rocking" under acceleration and braking. [1, 2, 3]
2. Vehicle Structural Fitment
    • Engine Installation: Transverse alignment (East-West layout)
    • Chassis Codes Covered:
        • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
        • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
        • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2]
3. Material Specifications
  • Core Material: High-elasticity natural rubber vulcanized directly onto stamped sheet steel and cast iron base frames.
  • Damping Classification: Passive, high-damping solid elastomeric rubber design (non-hydraulic setup for standard 1.0L configurations).

Toyota Passo Model 2014 Engine Mountain

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The 2014 Toyota Passo utilizes a multi-point engine isolation setup: [1]
    • Right-Hand Mount (Front Right / Engine Side):
        • Part Number: 12305-B1110 (or 12305-B1052 depending on market frame)
        • Function: Primary insulator sub-assembly engine mounting RH. Holds engine weight and dampens rotational torque. [1, 2]
    • Left-Hand Mount (Front Left / Transmission Side):
        • Part Number: 12306-B1090 (or 12306-B1030 alternate code)
        • Function: Insulator sub-assembly engine mounting LH. Secures the gearbox housing to the frame. [1, 2]
    • Rear Torque Rod (Lower Engine Mount):
        • Part Number: 12309-B1110
        • Function: Rod sub-assembly engine moving control. Constrains the "pitching" or rocking motion of the engine during acceleration and gear shifts. [1]
2. Vehicle Structural Fitment
    • Engine Orientation: Transverse (East-West installation) [1]
    • Chassis Compatibility:
        • KGC30: 1.0L Petrol, FWD layout
        • KGC35: 1.0L Petrol, AWD layout
        • NGC30: 1.3L Petrol, FWD layout [1]
3. Material Specifications
    • Composition: High-damping natural rubber bonded to heavy-gauge stamped steel base frames.
    • Design Type: Solid rubber bushing inserts enclosed in cast/stamped metal brackets (non-hydraulic/passive dampening system).
Showing 112 of 639 results
Please select your product
Product has been added to your cart
Compare (0)