Sort

Toyota Mark X GRX 120 Ex-Japan Shocks

KSh5,000.00
Internal Technology & Damping Profile
  • Front Shock Internal Design: Double-acting, Gas-charged High-Pressure Twin-Tube Strut Architecture.
  • Rear Shock Internal Design: Heavy-duty, Gas-charged Monotube Damper Assembly. [1, 2]
  • Damping Medium: Nitrogen gas (N₂) combined with multi-grade all-weather hydraulic fluid to reduce aeration and fade during hard cycling.
  • Standard Operating Valence: Velocity-sensitive valving engineered to maintain vehicle stability under high-speed cornering while preserving classic executive rear-wheel-drive (RWD) highway comfort.
Part Numbers & Aftermarket Cross-Reference
  • Front Axle OEM Part Numbers (Toyota / JDM Factory):
    • Right Hand (RH): 48510-80160, 48510-80161, 48510-22A00, 48510-22A40, 48510-80403
    • Left Hand (LH): 48520-29845, 48520-29855, 48520-80045, 48520-80126 [1, 2, 3]
  • Rear Axle OEM Part Numbers (Toyota / JDM Factory): 48530-80397, 48530-22620, 48530-22510 [1]
  • KYB (Kayaba) Aftermarket Reference Numbers (JDM Gas-A-Just / Excel-G):
    • Front Right Hand (RH): 551112
    • Front Left Hand (LH): 551113
    • Rear Axle (Universal LH/RH): 551120 [1, 2, 3, 4, 5]
Chassis, Platform & Fitment Compatibility
  • Chassis Range: Toyota S180 Platform (Rear-Wheel Drive luxury configuration).
  • Target Model Codes: GRX120 (2.5L 250G variants) and GRX121 (3.0L 300G variants).
  • Platform Architecture Sharing: Swaps identical structural dimensions, lower clevis mounts, upper rod threads, and mounting stroke geometry with the JDM Toyota Crown (GRS180, GRS182, GRS200) and Lexus IS/GS series of the same production era.
  • Fitment Exclusion: GRX125 (4WD) models use specific front differential layout cutouts and unique stroke lengths; standard GRX120 front struts do not bolt onto 4WD spindles. [1, 2, 3, 4]
Component Sizing & Interface Layout
  • Front Lower Mounting Clevis: Eye-joint bracket configured to mate directly to the front double-wishbone lower control arm pivot.
  • Rear Lower Mounting Bushing: Integral metal sleeve insulated by a vulcanized, high-durometer rubber bushing.
  • Piston Rod Configuration: Micro-smooth chrome-plated piston rods featuring factory integrated hard stops to prevent bottoming out against the upper seat assembly.
  • AVS Note: Non-electronic variations use a standard manual threaded piston rod tip; models equipped with Toyota’s Adaptive Variable Suspension (AVS) use a hollow-top rod profile to insert the electronic actuator control pin.

Nissan Note Model E12 Engine Mounting

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The E12 platform utilizes a three-point suspended engine containment setup designed to isolate the low-frequency vibrations typical of 3-cylinder powertrains:
  • Right-Hand Engine Mount (Front Right / Timing Side):
    • OEM Part Numbers: 11210-3HD3A, 11210-3HD0A
    • Function: Primary weight-bearing insulator. It secures the engine block to the right-hand chassis frame rail and absorbs primary engine harmonics. [1, 2]
  • Left-Hand Transmission Mount (Front Left / Gearbox Side):
    • OEM Part Numbers: 11220-3HD2A, 11360-1HC3C
    • Function: Gearbox casing insulator. It bears the weight of the transmission case, counteracting drivetrain movement during deceleration and CVT ratio adjustments. [1]
  • Rear Torque Rod (Lower Engine Stabilizer / "Dog-Bone" Mount):
    • OEM Part Numbers: 11360-1HC0A, 11360-1HC0D
    • Function: Lower restriction link. It fastens the rear of the transmission casing directly to the lower subframe cross-member to suppress the rotational "pitching" or rocking motion of the engine during acceleration. [1, 2]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • DBA-E12 (2WD): 1.2L 3-cylinder naturally aspirated (HR12DE) or 1.2L 3-cylinder supercharged (HR12DDR)
    • DBA-NE12 (4WD): 1.2L 3-cylinder Petrol variants
    • HE12 (e-POWER): 1.2L HR12DE paired with the EM57 electric motor generation system [1, 2]
  • Platform Sharing Interchangeability: The engine mounts directly match the mounting layout used on the Nissan March / Micra (K13) and the Nissan Latio (N17) platforms. [1, 2]
3. Material Specifications
  • Material Composition: Specially treated, high-absorption vulcanized natural rubber chemically bonded to stamped structural carbon steel base plates and cast aluminum brackets.
  • Damping Classification: Standard solid-core high-damping elastomeric design (passive configuration) optimized to target secondary-order idle frequencies.
4. Standard Installation Torque Specifications
  • Right-Hand Mount-to-Chassis Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Right-Hand Mount-to-Engine Bracket Bolts: ~62 Nm (approx. 45 ft-lbs)
  • Left-Hand Mount-to-Gearbox Casing Stud/Nut: ~62 Nm to 80 Nm (approx. 45 to 59 ft-lbs)
  • Rear Lower Torque Rod Bracket Bolts: ~80 Nm (approx. 59 ft-lbs) [1, 2, 3]

Daihatsu Mira Engine Mountain

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The Daihatsu Mira relies on a 3-piece multi-point containment setup optimized to counteract the low-frequency vibrations typical of 3-cylinder engines:
  • Right-Hand Mount (Front Right / Timing Belt Side):
    • OEM Part Numbers: 12305-B2210, 12305-B2140, or 12305-B2040 (depending on chassis platform)
    • Function: Primary weight-bearing insulator. Anchors the structural block to the right engine bay frame rail. [1, 2]
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B2080 or 12306-B2035
    • Function: Gearbox casing insulator. It isolates transaxle load shifts and rotational transmission torque. [1, 2, 3]
  • Rear Roll Stopper (Lower Center Torque Rod):
    • OEM Part Numbers: 12329-B2070, 12361-B7206, or 12373-B7203
    • Function: Moving control torque rod. It connects the transmission housing directly to the lower firewall cross-member or subframe to restrict back-and-forth rotational pitching. [1, 2, 3, 4]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West layout)
  • Chassis & Powertrain Compatibility:
    • L275S / L285S Series: 0.66L 3-cylinder Petrol (KF-VE / KF-DET), FWD/AWD
    • L276 Series: 1.0L 3-cylinder Petrol (1KR-FE), FWD
    • LA300S / LA310S (Mira e:S): 0.66L Eco-Idle Petrol (KF-VE3), FWD/AWD [1, 2]
3. Material & Damping Specifications
  • Material Composition: Natural vulcanized rubber chemically bonded to stamped structural steel, reinforced cast aluminum casings, and iron framing brackets. [1]
  • Damping Classification:
    • Right-Hand Position: Specially engineered Hydraulic Design (Hydro-Mount) containing internal fluid to absorb the rough secondary-order idle harmonics inherent to light 3-cylinder setups.
    • Left and Rear Positions: Standard solid-core rubber-metal elastomeric bushings.

Toyota Passo Model 2017 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2017 model utilizes a revised three-point engine containment layout optimized for the newer high-efficiency powertrain:
  • Right-Hand Mount (Front Right / Engine Side):
    • OEM Part Numbers: 12305-B1140 / 12305-B1220
    • Function: Primary weight-bearing stabilizer. It anchors the cylinder block to the right body rail frame and absorbs structural engine vibration.
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B1130 / 12306-B1131
    • Function: Gearbox casing insulator. It isolates noise and absorbs shifting torque from the Continuous Variable Transmission (CVT).
  • Rear Torque Rod (Lower Engine Stabilizer):
    • OEM Part Numbers: 12309-B1080 (Rod) and 12321-B1050 / 12321-B1070 (Bracket)
    • Function: Lower control torque rod. Connects directly to the front suspension cross-member to limit back-and-forth structural rocking during acceleration and deceleration.
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West layout)
  • Chassis & Powertrain Compatibility:
    • M700A: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
    • M710A: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
3. Material Specifications
  • Core Material: Heavy-duty vulcanized natural rubber formulation chemically bonded to a lightweight, reinforced cast aluminum casing and stamped steel base bracket assembly.
  • Damping Classification: Passive, solid-core high-absorption elastomeric system tailored to control 3-cylinder idle harmonics.

Toyota Passo Model 2012 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2012 model features a structural, multi-point isolation configuration split into three key positions to absorb vibration:
  • Right-Hand Mount (Front Right / Engine Side):
    • OEM Part Numbers: 12305-B1050 / 12305-B1051 / 12305-B1052
    • Function: Weight-bearing insulator assembly. Anchors the primary engine block structure to the right chassis frame rail. [1]
  • Left-Hand Mount (Front Left / Transmission Side):
    • OEM Part Numbers: 12306-B1030 / 12306-B1050
    • Function: Transmission casing insulator. Controls rotational torque loads generated through the drivetrain and transaxle.
  • Rear Torque Rod (Lower Engine Stabilizer):
    • OEM Part Numbers: 12309-B1060 (Rod Assembly) and 12321-B1040 (Mounting Bracket)
    • Function: Control link rod. Mounted directly to the vehicle lower cross-member subframe to constrain back-and-forth structural "rocking" or pitching during sudden throttle inputs. [1, 2]
2. Vehicle Structural Fitment
  • Engine Installation: Transverse alignment (East-West configuration)
  • Chassis & Powertrain Compatibility:
    • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
    • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
    • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2, 3]
3. Material Specifications
  • Core Material: Vulcanized natural rubber compound bonded to a stamped carbon steel and reinforced iron casting frame casing.
  • Damping Classification: Standard solid-core passive elastomeric rubber setup.

Toyota Passo Model 2013 Engine Mountain

KSh4,000.00
1. Mechanical Layout & Component Breakdown
The 2013 model employs a multi-point containment design to manage powertrain vibration, divided into three core positions: [1, 2]
    • Right-Hand Mount (Engine Side):
        • OEM Part Numbers: 12305-B1080 / 12305-B1050 / 12305-B1100
        • Function: Primary weight-bearing insulator assembly. Supports the cylinder block casing and dampens structural vibrations. [1, 2]
    • Left-Hand Mount (Gearbox / Transmission Side):
        • OEM Part Numbers: 12306-B1050 / 12306-B1080
        • Function: Gearbox housing insulator. Absorbs longitudinal and lateral loads generated during gear changes or CVT ratio shifts. [1, 2]
    • Rear Torque Rod (Lower Stabilization Link):
        • OEM Part Numbers: 12309-B1060 (Rod) and 12321-B1040 (Rear Bracket)
        • Function: Moving control torque rod. Attaches directly to the lower subframe to limit back-and-forth structural "rocking" under acceleration and braking. [1, 2, 3]
2. Vehicle Structural Fitment
    • Engine Installation: Transverse alignment (East-West layout)
    • Chassis Codes Covered:
        • KGC30: 1.0L 3-cylinder Petrol (1KR-FE), Front-Wheel Drive (FWD)
        • KGC35: 1.0L 3-cylinder Petrol (1KR-FE), All-Wheel Drive (AWD)
        • NGC30: 1.3L 4-cylinder Petrol (1NR-FE), Front-Wheel Drive (FWD) [1, 2]
3. Material Specifications
  • Core Material: High-elasticity natural rubber vulcanized directly onto stamped sheet steel and cast iron base frames.
  • Damping Classification: Passive, high-damping solid elastomeric rubber design (non-hydraulic setup for standard 1.0L configurations).

Toyota Passo Model 2014 Engine Mountain

KSh4,000.00
1. Component Breakdown & OEM Part Numbers
The 2014 Toyota Passo utilizes a multi-point engine isolation setup: [1]
    • Right-Hand Mount (Front Right / Engine Side):
        • Part Number: 12305-B1110 (or 12305-B1052 depending on market frame)
        • Function: Primary insulator sub-assembly engine mounting RH. Holds engine weight and dampens rotational torque. [1, 2]
    • Left-Hand Mount (Front Left / Transmission Side):
        • Part Number: 12306-B1090 (or 12306-B1030 alternate code)
        • Function: Insulator sub-assembly engine mounting LH. Secures the gearbox housing to the frame. [1, 2]
    • Rear Torque Rod (Lower Engine Mount):
        • Part Number: 12309-B1110
        • Function: Rod sub-assembly engine moving control. Constrains the "pitching" or rocking motion of the engine during acceleration and gear shifts. [1]
2. Vehicle Structural Fitment
    • Engine Orientation: Transverse (East-West installation) [1]
    • Chassis Compatibility:
        • KGC30: 1.0L Petrol, FWD layout
        • KGC35: 1.0L Petrol, AWD layout
        • NGC30: 1.3L Petrol, FWD layout [1]
3. Material Specifications
    • Composition: High-damping natural rubber bonded to heavy-gauge stamped steel base frames.
    • Design Type: Solid rubber bushing inserts enclosed in cast/stamped metal brackets (non-hydraulic/passive dampening system).

Toyota Passo Model 2015 Engine Mountain

KSh4,000.00
Engine & Performance Specifications
    • Engine Model: 1KR-FE (Alternatively available with the 1.3L 1NR-FE)
    • Displacement: 996 cc (1.0 Litre)
    • Cylinder Configuration: Inline 3-cylinder, 12-Valve
    • Valvetrain: DOHC (Double Overhead Camshaft)
    • Bore × Stroke: 71.0 mm × 83.9 mm
    • Compression Ratio: 11.5:1 (Upgraded in 2014 for higher thermal efficiency)
    • Maximum Power Output: 69 PS (51 kW) @ 6,000 RPM
    • Maximum Torque: 92 N·m (9.4 kg·m) @ 4,400 RPM [1, 2, 3, 4, 5, 6]
Drivetrain & Transmission
    • Transmission Type: Continuously Variable Transmission (CVT) [1, 2]
    • Drive System Configurations:
        • 2WD / Front-Wheel Drive (Chassis Model: KGC30)
        • 4WD / All-Wheel Drive (Chassis Model: KGC35) [1, 2, 3]
Engine Mounting Setup (Physical Mounts)
  • Mounting Configuration: 3-Point Insulator Isolation Setup [1]
  • Right-Hand (RH) Mount: Hydraulic (Fluid-filled) Insulator assembly to absorb 3-cylinder engine idling vibrations (OEM Base Part No: 12305). [1, 2]
  • Left-Hand (LH) Mount: Transmission-side rubber insulator bracket assembly (OEM Base Part No: 12306). [1]
  • Rear (RR) Mount: Engine moving control rod/rear structural engine stay to limit longitudinal engine twisting during acceleration (OEM Base Part No: 12380 / 12309). [1]

Toyota Passo Model 2018 Engine Mountain

KSh4,000.00
Engine & Performance Specifications
  • Engine Model: 1KR-FE
  • Displacement: 996 cc (1.0 Litre)
  • Cylinder Configuration: Inline 3-cylinder, 4-cycle
  • Valvetrain: DOHC (Double Overhead Camshaft)
  • Bore × Stroke: 71.0 mm × 83.9 mm
  • Maximum Power Output: 69 PS (51 kW) @ 6,000 RPM
  • Maximum Torque: 92 N·m (9.4 kg·m) @ 4,400 RPM
  • Fuel Type: Petrol [1, 2, 3, 4, 5, 6]
Drivetrain & Transmission
  • Transmission Type: Continuously Variable Transmission (CVT) [1, 2]
  • Drive System Options:
    • 2WD / Front-Wheel Drive (Chassis Model: M700A)
    • 4WD / All-Wheel Drive (Chassis Model: M710A) [1, 2, 3]
Fuel & Capacity
  • Fuel Tank Capacity: 36 to 38 Litres
  • Average Fuel Efficiency: Approximately 20.0 km/L to 24.0 km/L depending on driving conditions

Toyota Axio Model 2007-2012 Engine Mountain

KSh4,000.00
Toyota Corolla Axio (2007–2012) Engine Mount Technical Specifications
The Toyota Corolla Axio spanning the 2007–2012 production timeline belongs to the E140 platform generation (chassis codes: NZE141, NZE144, ZRE142, ZRE144). It utilizes a 4-point structural engine suspension matrix designed to handle transverse powertrain configurations. [1, 2, 3]
1. Component Matrix & Factory Part Numbers
  • Right-Hand Side (RH) Engine Mount:
    • Type: Liquid-filled hydro-elastic engine cushion assembly (utilizes specialized hydraulic oil internals to suppress low-frequency structural powertrain shudder at idle).
    • OEM Part Numbers: 12305-21300 / 12305-21220 (1.5L 1NZ-FE); 12305-37091 (1.8L 2ZR-FE / 2ZR-FAE). [1, 2]
  • Left-Hand Side (LH) Gearbox/Transmission Mount:
    • Type: High-damping rubber-to-metal isolator stabilizing the transmission case assembly.
    • OEM Part Numbers: 12372-21150 / 12372-21240 (CVT and Manual variants). [1, 2]
  • Rear Engine Torque Rod/Steady Mount:
    • Type: Longitudinal roll-control torque stopper (prevents back-and-forth rotational engine displacement under clutch release or rapid deceleration).
    • OEM Part Numbers: 12371-21150 / 12371-21250. [1]
  • Front Engine Mount Buffer:
    • Type: Snubber structural damper.
    • OEM Part Number: 12361-21040 / 12361-21050. [1]
2. Material Composition & Structural Standards
  • Chassis Core Framing: Robotic MIG-welded stamped high-tensile carbon steel housings mated to structural cast-aluminum block-side mounting brackets. [1]
  • Elastomeric Core: Vulcanized natural rubber (NBR/NR matrix) engineered for continuous oil resistance and high thermal stability within the engine bay. [1, 2]
  • Dampening Medium: Glycol-based fluid buffer built directly into the internal chamber of the RH passenger-side assembly. [1]
3. Drivetrain & Layout Fitment Metrics
  • 2WD / FF Variants (NZE141, ZRE142): Utilize flat, non-extended rear roll isolation brackets that anchor directly into the front crossmember subframe channel. [1, 2]
  • 4WD Variants (NZE144, ZRE144): Employ a modified clearance geometry bracket setup on the rear mount assembly to provide necessary spatial clearance for the transfer case output flange and intermediate drive shafts. [1]

Toyota Fielder Model 2005 Engine Mountain

KSh4,000.00
Toyota Corolla Fielder (2005) Engine Mount Technical Specifications
The 2005 Toyota Corolla Fielder (First Generation, E120 series; chassis codes like NZE121G, ZZE122G, CE121G) features a 4-point engine mounting matrix (front, rear, right/passenger side, and left/driver side transmission mount). The design uses a combination of liquid-filled hydro-elastic dampeners and vulcanized rubber isolators to support transverse engine layouts. [1, 2, 3]
1. Component Breakdown & Factory Part Numbers
  • Right-Hand Side (RH) Engine Mount:
    • Type: Hydraulic-insulator cushion assembly (fluid-filled to isolate low-frequency engine block vibration at idle).
    • OEM Reference: 12305-21130 / 12305-21160 (Engine type: 1NZ-FE 1.5L). [1, 2]
  • Left-Hand Side (LH) Transmission Mount:
    • Type: Transverse rubber-to-metal isolator assembly supporting the gearbox housing shell.
    • OEM Reference: 12372-22080 / 12372-21110. [1]
  • Rear Engine Torque Mount:
    • Type: Anti-torque roll rubber bush stabilizer (controls forward/backward engine pitching under acceleration/braking forces).
    • OEM Reference: 12371-22170 (2WD layouts) or 12371-28070 (Diesel CE121 variants). [1, 2, 3]
  • Front Engine Stop Mount:
    • Type: Longitudinal movement restrictor.
    • OEM Reference: 12361-21020. [1]
2. Engineering & Material Standards
  • Structural Housing Material: Cold-rolled heavy-gauge carbon steel framing coupled with die-cast aluminum sub-brackets.
  • Elastomeric Element: High-tensile vulcanized natural rubber (NR) specialized to optimize shore hardness against under-hood heat cycles.
  • Standard Fastening Threads: Metric coarse thread matrix (predominantly M10 × 1.25 body frame bolts and M12 × 1.25 engine bracket anchoring studs). [1]
3. Application Variations by Engine Type
  • 1NZ-FE (1.5L Petrol) / 1ZZ-FE (1.8L Petrol): Share lightweight aluminum engine bracket configurations interacting with fluid-dampened RH engine bays. [1, 2, 3]
  • 3C-E (2.2L Diesel Variant - CE121G): Employs distinct high-durometer solid rubber compound mounts with upgraded metal frame thickness to isolate standard high-torque diesel harmonic vibrations. [1, 2]

Mazda Demio Model 2010-2018 Engine Mountain

KSh7,500.00
Mazda Demio (2010–2018) Engine Mount Technical Specifications
The Mazda Demio spans two generations during the 2010–2018 timeline: the Third Generation (DE Series, 2007–2014) and the Fourth Generation (DJ Series, 2014–present). Both variations utilize a 3-point layout configuration consisting of an isolated right-hand side engine mount, a left-hand side gearbox/transmission mount, and a rear torque-rod engine stabilizer mount. [1, 2, 3, 4]
1. Third Generation (DE Series: 2010–2014) Specifications
  • Chassis System Codes: DE3FS, DE5FS, DE3AS, DEJFS [1]
  • Engine Codes Covered: 1.3L ZJ-VE, 1.3L P3-VPS (SkyActiv-G), 1.5L ZY-VE [1]
  • Mounting Architecture Components:
    • Right-Hand Side (RH) Engine Mount: Hydro-elastic cushion mount filled with glycol fluid designed to dampen structural frequencies.
      • OEM Factory Ref: D652-39-060 / D652-39-060H
    • Left-Hand Side (LH) Gearbox/Transmission Mount: Multi-plate rubber-to-metal bracket designed for transmission casing isolation.
      • OEM Factory Ref: D653-39-070 (CVT models) / D651-39-070 (Manual transmission)
    • Rear (Lower Trailing) Engine Torque Mount: Solid molded elastomer bracket managing rotational engine twist under heavy acceleration.
      • OEM Factory Ref: D651-39-040 / D653-39-04X [1, 2, 3, 4, 5, 6, 7, 8]
2. Fourth Generation (DJ Series: 2014–2018) Specifications
  • Chassis System Codes: DJ3FS, DJ3AS, DJ5FS, DJ5AS [1]
  • Engine Codes Covered: 1.3L P3-VPS, 1.5L P5-VPS (SkyActiv-G), 1.5L S5-DPTS (SkyActiv-D Diesel) [1]
  • Mounting Architecture Components:
    • Right-Hand Side (RH) Engine Mount: Heavy-duty fluid-filled hydraulic isolator structurally upgraded to manage the higher torque load of SkyActiv setups.
      • OEM Factory Ref: D10E-39-060 / DA6V-39-060
    • Left-Hand Side (LH) Gearbox/Transmission Mount: Top-bracket multi-point bushing isolator.
      • OEM Factory Ref: D10G-39-070
    • Rear (Lower Trailing) Engine Torque Mount: Center anti-twist rod connecting the lower engine block casting to the vehicle's front subframe assembly.
      • OEM Factory Ref: D10E-39-040 [1, 2, 3]
3. Hardware and Material Characteristics
  • Structural Composition: Stamped carbon steel structural arms integrated with vulcanized natural rubber (NR) dampening material or internal hydraulic fluid compartments.
  • Standard Fastener Thread Sizes: M10 × 1.5 frame attachment threads and M12 × 1.25 engine block through-stud threads. [1, 2, 3]

Toyota Nze Engine Mountain

KSh4,000.00
Engine Mount System Layout
  • Total Number of Mounts: 4 structural mounting units.
  • Mounting Positions & Configuration:
    • Front Engine Mount: Solid rubber cushion assembly positioned on the front radiator core crossmember to arrest forward rotational pitch.
    • Right-Hand (RH) Engine Mount: Heavy-duty rubber-metal isolation mount bolted to the engine timing chain cover bracket. This acts as the structural anchor for vertical engine mass.
    • Left-Hand (LH) Transmission Mount: Isolation block securing the gearbox/transaxle casing directly to the structural side-frame rail.
    • Rear Engine Mount: High-load torque-reaction insulator anchoring the rear differential/gearbox assembly to the rear engine subframe to eliminate longitudinal twist during gear shifts and acceleration.
  • Material Architecture: High-damping vulcanized synthetic rubber bonded to die-cast aluminum and heavy-gauge stamped steel mounting shells.
Engine Mount Fastener Torque Specifications
  • Right-Hand (RH) Mount Through-Bolt to Engine Bracket: 95 Nm (70 ft-lbs)
  • Right-Hand (RH) Mount Base Plate to Body Bracket Bolts: 52 Nm (38 ft-lbs)
  • Left-Hand (LH) Transmission Mount to Transaxle Bracket Bolt: 56 Nm (41 ft-lbs)
  • Left-Hand (LH) Transmission Mount Base to Chassis Frame Bolts: 95 Nm (70 ft-lbs)
  • Front Engine Mount Centering Through-Bolt to Crossmember: 95 Nm (70 ft-lbs)
  • Front Engine Mount Bracket to Chassis Frame Bolts: 85 Nm (63 ft-lbs)
  • Rear Engine Mount Longitudinal Through-Bolt: 95 Nm (70 ft-lbs)
  • Rear Engine Mount Bracket to Subframe Structural Bolts: 87 Nm (64 ft-lbs)
Core Engine Specs (NZE121 Platform)
The mounting layout supports the standard transverse inline-4 cylinder block configuration:
  • Engine Code: 1NZ-FE
  • Configuration: Inline 4-Cylinder, 16-Valve DOHC with VVT-i
  • Displacement: 1,496 cc
  • Cylinder Bore x Stroke: 75.0 mm × 84.7 mm
  • Compression Ratio: 10.5:1
  • Peak Power Output: 109 PS (80 kW / 107 HP) @ 6,000 rpm
  • Peak Torque Output: 141 Nm (104 lb-ft) @ 4,200 rpm

Toyota Axiom Engine Mountain

KSh4,000.00
Engine Mount System Layout
  • Total Number of Mounts: 4 structural mounting assemblies. [1]
  • Mounting Positions & Configuration:
    • Front Engine Mount: Solid rubber-to-metal dampening cushion mounted directly onto the front crossmember subframe assembly.
    • Right-Hand (RH) Engine Mount: A high-isolation, liquid-filled hydraulic mount (hydro-mount) attached to the engine's timing chain cover bracket. This is the primary load-bearing mount for engine mass.
    • Left-Hand (LH) Transmission Mount: A structural rubber isolator linking the transaxle/gearbox casing to the main vehicle side-frame rail.
    • Rear Lower Engine Mount: A torque-reaction "dog-bone" style insulator anchoring the rear transmission casing to the subframe to manage longitudinal engine twist during acceleration. [1, 2, 3, 4]
Engine Mount Fastener Torque Specifications
  • Right-Hand (RH) Mount Through-Bolt to Engine Bracket: 95 Nm (70 ft-lbs)
  • Right-Hand (RH) Mount Main Structural Nut (Nut A): 95 Nm (70 ft-lbs)
  • Right-Hand (RH) Mount Insulator Stopper Nut (Nut B): 52 Nm (38 ft-lbs)
  • Right-Hand (RH) Mount Base Plate to Body Bolts: 95 Nm (70 ft-lbs)
  • Left-Hand (LH) Transmission Mount to Transaxle Bracket: 56 Nm (41 ft-lbs)
  • Left-Hand (LH) Transmission Mount to Chassis Body Bolts: 95 Nm (70 ft-lbs)
  • Front Engine Mount Insulator to Crossmember Bolt: 95 Nm (70 ft-lbs)
  • Front Engine Mount Bracket to Chassis Body: 85 Nm (63 ft-lbs)
  • Rear Lower Engine Mount Through-Bolt to Bracket: 95 Nm (70 ft-lbs)
  • Front Subframe Crossmember Assembly to Body Bolts: 99 Nm (73 ft-lbs) [1, 2]
Supported Engine Platform Configurations
The structural design patterns accommodate the core transverse inline-4 cylinder blocks utilized throughout the Axio production cycle: [1]
Engineering Metric 1.5L 1NZ-FE Powertrain 1.5L 2NR-FKE Powertrain
Configuration Inline 4-Cylinder, 16-Valve DOHC Inline 4-Cylinder, 16-Valve DOHC
Cam Timing Tech VVT-i (Variable Valve Timing) Dual VVT-iE (Electric Intake, Hyd. Exhaust)
Displacement 1,496 cc 1,496 cc
Bore x Stroke 75.0 mm × 84.7 mm 72.5 mm × 90.6 mm
Compression Ratio 10.5:1 13.5:1 (Atkinson-cycle setup)
Peak Power Output 109–110 PS @ 6,000 rpm 109 PS (80 kW) @ 6,000 rpm
Peak Torque Output 140–143 Nm @ 4,200–4,400 rpm 136 Nm @ 4,400 rpm

Honda Fit 2012 Engine Mountain

KSh4,000.00
Engine Mount System Layout
  • Total Number of Mounts: 3 structural mounting assemblies [1, 2]
  • Mounting Positions & Configuration:
    • Front / Right-Hand Mount: A heavy-duty, fluid-filled hydraulic isolation mount (hydro-mount) attached to the engine block side. It bears vertical load and dampens mid-to-high frequency block frequencies.
    • Left-Hand Transmission Mount: A solid rubber-metal isolation assembly supporting the gearbox casing to the structural framing.
    • Rear Lower Torque Strut Mount: Known as the "torque rod" or "dog-bone" link. It connects the transmission housing directly back into the front crossmember/subframe to absorb front-to-rear rotational energy during acceleration and engine braking. [1, 2, 3, 4, 5]
  • Isolation Material: Vulcanized synthetic elastomer combined with glycol fluid dampening internals (on the primary side mount). [1]
Engine Mount Fastener Torque Specifications
  • Front Right-Hand Mount (Side Bracket to Block Bolts): 54 Nm (40 ft-lbs)
  • Front Right-Hand Mount (Through-Bolt to Body): 64 Nm (47 ft-lbs)
  • Left-Hand Gearbox Side Mount Through-Bolt: 54 Nm (40 ft-lbs)
  • Rear Lower Torque Strut Mount Horizontal Bolt (To Frame): 83 Nm (approx. 61 ft-lbs)
  • Rear Lower Torque Strut Mount Vertical Bolt (To Bracket): 93 Nm (approx. 68 ft-lbs) [1, 2]
Core Engine Specs (GE6 / GE8 Chassis Variations)
The 2012 model year globally features two primary variants of the Honda L-Series engine family: [1, 2]
Engineering Parameter 1.3L Variant (L13A Engine) 1.5L Variant (L15A Engine)
Engine Code L13A L15A (L15A7 i-VTEC)
Configuration Inline 4-Cylinder, 4-Stroke Inline 4-Cylinder, 4-Stroke
Valvetrain 16-Valve SOHC i-VTEC 16-Valve SOHC i-VTEC
Timing Drive Chain-driven Chain-driven
Displacement 1,339 cc 1,497 cc
Bore x Stroke 73.0 mm × 80.0 mm 73.0 mm × 89.4 mm
Compression Ratio 10.5:1 10.4:1
Maximum Power 100 PS (73 kW / 99 HP) @ 6,000 rpm 117–120 HP (88 kW) @ 6,600 rpm
Maximum Torque 127 Nm @ 4,800 rpm 145 Nm (106 lb-ft) @ 4,800 rpm
Fuel System PGM-FI Multi-Point Injection PGM-FI Multi-Point Injection
Fluid & Service Specs
  • Engine Oil Total Capacity: 3.6 Liters (Refill capacity with filter change) [1]
  • Factory Recommended Grade: API Premium 0W-20 or 5W-30 synthetic oil [1]
  • Valve Clearances (Cold Engines):
    • Intake: 0.15 mm – 0.19 mm
    • Exhaust: 0.26 mm – 0.30 mm [1]
  • Spark Plug Gaps: 1.0 mm – 1.1 mm

Nissan Xtrail NT32 Engine Mountain

KSh8,000.00
Engine Mount System Layout
  • Total Number of Mounts: 4 individual mounting points [1]
  • Mount Components:
    • Right-Hand (Passenger Side): Main engine rubber-metal suspended engine mount
    • Left-Hand (Driver Side): Transmission / Gearbox rubber pad mounting
    • Upper Front / Right: Torque strut rod / Torque stabilizer link (prevents engine twisting under acceleration)
    • Rear (Lower): Rear torque support mount / "Dog bone" mount attached to the subframe [1, 2, 3, 4, 5]
  • Mounting Materials: Heavy-duty vulcanized elastomer rubber structurally bonded to cast aluminum and forged steel outer brackets. [1, 2]
Engine Mount Torque Specifications
  • Right-Hand Suspended Mount Bolt (Body Side): 62 Nm (approx. 45 ft-lbs)
  • Right-Hand Suspended Mount Bolt (Engine Side): 62 Nm (approx. 45 ft-lbs)
  • Upper Engine Torque Strut Link Bolts: 75 Nm (approx. 55 ft-lbs)
  • Left-Hand Gearbox Mount (To Bracket): 62 Nm (approx. 45 ft-lbs)
  • Left-Hand Rubber Pad Bolt (To Body): 21 Nm (approx. 15 ft-lbs)
  • Left-Hand Rubber Pad Bolt (To Mounting): 105 Nm (approx. 77 ft-lbs)
  • Transmission Mount Main Stud (Gearbox Side): 180 Nm (approx. 132 ft-lbs)
  • Rear Lower Torque Rod (Engine Tie-Bar Bolt): 180 Nm (approx. 132 ft-lbs) [1, 2]
Supported Engine Specifications (NT32 Core Block - MR20DD)
The NT32 chassis configuration denotes the 4WD version of the T32 X-Trail, which houses the 2.0L MR20DD powertrain: [1, 2]
  • Engine Code: MR20DD
  • Configuration: Inline 4-Cylinder, DOHC, 16 Valves with Twin CVTC
  • Fuel Injection: Direct Fuel Injection (Nissan Di)
  • Displacement: 1,997 cc
  • Cylinder Bore x Piston Stroke: 84.0 mm × 90.1 mm
  • Compression Ratio: 11.2:1
  • Maximum Power: 147 PS (108 kW / ~145 HP) @ 6,000 rpm
  • Maximum Torque: 207 Nm (21.1 kg·m) @ 4,400 rpm

Toyota Vitz 1KR Slim Engine

KSh60,000.00
Core Engine Architecture
  • Engine Code: 1KR-FE
  • Configuration: Inline 3-Cylinder, 4-Stroke
  • Valvetrain: DOHC (Double Overhead Camshaft), 12 Valves (4 valves per cylinder)
  • Timing Drive: Chain-driven
  • Phase Regulator: VVT-i (Variable Valve Timing-intelligence) on the intake side
  • Displacement: 996 cc (commonly referenced as 1.0L or 998 cc depending on the market variant)
  • Cylinder Bore x Piston Stroke: 71.0 mm × 83.9 mm
  • Compression Ratio: 10.5:1
  • Aspiration: Naturally Aspirated (Non-turbocharged)
  • Material: Aluminum alloy cylinder block and cylinder head
  • Dry Weight: ~67–75 kg (without starter/alternator/compressor) [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11]
Performance & Output
  • Maximum Power: 68–71 PS (50–52 kW / ~69–71 HP) @ 6,000 rpm
  • Maximum Torque: 92–94 Nm (9.4–9.6 kg·m) @ 3,600 rpm to 4,300 rpm
  • Idle Speed: 730–830 rpm [1, 2, 3, 4, 5, 6]
Fuel & Ignition Systems
  • Fuel Delivery System: EFI (Electronic Fuel Injection) with Multi-Point Manifold Fuel Injection (MPFI)
  • Ignition System: DIS (Direct Ignition System)
  • Ignition Timing: 0 to 15° BTDC
  • Fuel Type: Regular Unleaded Gasoline [1, 2, 3, 4, 5]
Service & Fluid Specifications
  • Engine Oil Capacity: 3.1 Liters (total refill capacity) [1, 2]
  • Recommended Oil Viscosity: 0W-20 / 5W-20 (5W-30 is also widely adopted locally depending on ambient operating conditions) [1, 2]
  • Hydraulic Lifters: None (Requires manual periodic valve clearance adjustments) [1]
  • Valve Clearance (Cold):
    • Intake: 0.145–0.235 mm
    • Exhaust: 0.275–0.365 mm [1]
  • Standard Cylinder Compression Pressure: 1,422 kPa (206 psi) standard / 1,079 kPa (156 psi) minimum

2SZ Slim Engine Toyota Vits Model 2005

KSh150,000.00
1. Core Engine Architecture
  • Engine Code: 2SZ-FE.
  • Configuration: Transverse inline 4-cylinder, 4-stroke, petrol.
  • Valvetrain: DOHC (Double Overhead Cam), 16 valves, chain-driven with VVT-i (Variable Valve Timing with intelligence).
  • Displacement: 1,296 cc (1.3 Litres).
  • Bore x Stroke: 72.0 mm × 79.6 mm.
  • Compression Ratio: 11.0:1 (High compression setup specifically engineered for the Japanese domestic market).
  • Block Material: Cast-iron closed-deck block featuring an offset Desaxe crankshaft to optimize piston side-load friction. [1, 2, 3, 4, 5]
2. Performance Outputs & Drivetrain
  • Maximum Power output: 87 PS / 86 hp (64 kW) @ 6,000 RPM.
  • Maximum Torque: 116 N·m (11.8 kg-m) @ 4,000 RPM.
  • Fuel System: Multi-point Electronic Fuel Injection (EFI) governed by a MAP sensor and an electronic throttle body assembly.
  • Transmission Pairing: Mated directly to an ultra-efficient, smooth Aisin Continuously Variable Transmission (CVT). (Note: The 4WD Vitz from 2005 uses the older, wider 2NZ-FE engine paired with a 4-speed conventional automatic). [1, 2, 3, 4, 5, 6]
3. Key Visual & Mechanical Identifiers (The JDM Layout)
The JDM 2SZ-FE engine block is visually compact and features distinct localized technology compared to standard export engines: [1]
  • Roller Rocker Valvetrain: Incorporates specialized friction-reducing rocker arm mechanisms. [1]
  • EGR System Integration: The JDM engine features an integrated EGR (Exhaust Gas Recircirculation) valve system to lower cylinder emissions. [1]
  • Compact Intake Runners: Features a curved, lightweight intake manifold setup built tightly to the engine frame to save room in the subcompact engine bay.
4. Critical Maintenance Specifications
Because the 2SZ-FE is a high-compression, tight-clearance machine, proper fluid maintenance is highly critical to avoid piston ring coking or timing chain stretch: [1]
Maintenance Category Factory Technical Specification
Recommended Oil Grade 5W-30 Fully Synthetic
Engine Oil Capacity 3.4 Litres (when changing with a new oil filter)
Valve Lifter Type Solid bucket lifters (Requires manual checking/adjustment via shims; no hydraulic lifters)
Spark Plug Type Long-life Iridium plugs (e.g., NGK LFR6C-11 or Denso K20HR-U11 variants)
Timing Element High-durability Morse silent type timing chain
Cooling Capacity ~4.5 Litres (Toyota Super Long Life Pink Coolant)

1NZ Slim Engine Probox

KSh130,000.00
1. Architectural & Core Specifications
  • Engine Code: 1NZ-FE (Late-generation "Slim" architecture).
  • Configuration: Transverse Inline 4-cylinder, 4-stroke, petrol.
  • Valvetrain: DOHC (Double Overhead Cam), 16 valves, chain-driven with VVT-i on the intake camshaft.
  • Displacement: 1,496 cc (1.5 Litres).
  • Bore x Stroke: 75.0 mm x 84.7 mm.
  • Compression Ratio: 10.5:1 to 11.0:1 (depending on the exact manufacturing year).
2. Performance Outputs
  • Maximum Power: 105 to 109 hp (77 to 80 kW) @ 6,000 RPM.
  • Maximum Torque: 138 to 141 N·m (102 to 104 ft-lbs) @ 4,200 RPM.
  • Fuel System: Multi-point Electronic Fuel Injection (EFI) governed by an ETCS-i (Electronic Throttle Control System-intelligent) drive-by-wire system.
3. Key Upgrades Over the Older "Fat" 1NZ Engine
The mechanical enhancements that give the "Slim" engine its distinctive look and character include:
  • Roller Rocker Arms: The valvetrain features integrated needle-bearing roller rockers instead of flat bucket lifters, significantly reducing internal friction and valvetrain noise.
  • Hydraulic Lash Adjusters (HLAs): Uses oil pressure to maintain zero valve clearance automatically. This eliminates the need for periodic manual valve shim maintenance.
  • Plastic Intake Manifold: A compact, lightweight, and curved composite plastic runner system replaces the bulkier aluminum intake setup found on early-2000s models.
  • Ignition Blocks: Utilizes updated, narrower Stick Coil-on-Plug (COP) ignition coils that slide straight down into a tighter valve cover design.
4. Critical Maintenance Specifications
Because the Slim engine relies on tighter internal oil clearance paths and hydraulic valve components, using the correct lubricants is paramount to preventing early timing chain wear or hydraulic lash ticking.
Service Category Factory Recommended Data
Recommended Oil Viscosity 0W-20 (Highly Recommended) or 5W-30 Fully Synthetic
Engine Oil Capacity 3.7 Litres (with new oil filter change) / 3.4 Litres dry drain
Spark Plug Type Iridium / Platinum Long-Life (e.g., NGK DF6H-11B or equivalent)
Spark Plug Electrode Gap 1.1 mm (0.043 inches)
Firing Order 1 — 3 — 4 — 2
Cooling System Capacity 4.8 Litres (Toyota Super Long Life Coolant - Pink)
Timing Component Maintenance-free steel Timing Chain (requires no interval changes)

Suzuki Swift Model 2018 Engine Mountain

KSh8,000.00
Component & Material Specifications
  • Right Hand (RH) Engine Mount (Timing Belt/Chain Side):
    • Type: Hydraulic (Hydro-filled) dampening insulator.
    • Function: Isolates high-amplitude vibrations, which is highly critical on the 3-cylinder K10C models to prevent rough idling resonance from vibrating the cabin.
    • Housing Material: High-pressure die-cast aluminum alloy bracket with structural steel base plates.
  • Left Hand (LH) Transmission Mount (Gearbox Side):
    • Type: Rubber-metal bonded cushion insulator.
    • Function: Suspends the 5-speed manual, 6-speed automatic, or CVT gearbox directly to the frame rail.
  • Rear Torque Rod (Lower Engine Pitch Stopper):
    • Type: "Dog-bone" style anchor bracket with high-durometer rubber bushings.
    • Function: Restricts front-to-back engine twisting (torque reaction) during quick acceleration and heavy braking.
Genuine Suzuki OEM Part Numbers
Part configurations differ slightly between standard hatchbacks and the Swift Sport. The core reference numbers for the standard 2018 platform include:
  • Right Hand (RH) Engine Mount Assembly: 11610-52R00 / 11610-68R00
  • Left Hand (LH) Gearbox Mount Assembly: 11620-52R00 / 11620-68R10
  • Rear Lower Torque Rod / Stopper: 11710-52R00
Factory Fastener Torque Specifications
Note: To avoid twisting the internal rubber matrices out of their neutral seat, the engine block must be safely supported with a screw jack, and the chassis must be sitting level before bringing the primary bracket through-bolts up to final torque.
Fastener Connection Profile Metric Spec (N·m) Imperial Spec (ft-lbs)
RH Engine Mount Central Through-Bolt (to Engine Bracket) 85 N·m 63 ft-lbf
RH Mount-to-Chassis Frame Bolts 50 N·m 37 ft-lbf
LH Transmission Mount Center Nut/Bolt 80 N·m 59 ft-lbf
Rear Torque Rod Through-Bolts (Subframe to Transmission) 90 N·m 66 ft-lbf

Toyota Passo Model 2010 Engine Mountain

KSh4,000.00
First Generation (Early 2010 / 2004–2010: KGC10, KGC15, QNC10)
This version typically pairs with either a 1.0L (1KR-FE) or a 1.3L (K3-VE) engine. It utilizes a multi-mount layout consisting of independent right, left, and rear insulators. [1]
  • Right Engine Mount (Front Right / Timing Belt Side):
    • Type: Hydraulic (Hydro) fluid-filled dampener designed to isolate high-frequency engine vibration.
    • Body Material: Cast iron or heavy-gauge steel housing.
    • Core Material: Natural Rubber (NR) shock-reducing compound.
    • OEM Part Numbers: 12305-B1021, 12305-B1013, 12305-B1010. [1, 2, 3]
  • Left Engine Mount (Transmission Side):
    • Type: Rubber cushion insulator.
    • OEM Part Numbers: 12306-B1020, 12306-B1030. [1]
  • Rear Engine Mount (Torque Rod / Firewall Side):
    • Type: Anchor bracket insulator to prevent front-to-back engine pitching during acceleration.
    • OEM Part Numbers: 12309-B1020, 12309-B1040. [1]
Second Generation (Late 2010 / 2010–2016: KGC30, KGC35, NGC30)
Introduced in February 2010, this generation structural redesign accompanies the 1.0L (1KR-FE) and the newer 1.3L (1NR-FE) dual VVT-i engines. The mounting architecture was modified for improved cabin noise, vibration, and harshness (NVH) levels. [1, 2]
  • Left Engine Mount (Transmission Side):
    • Type: Enhanced rubber-to-metal bonded insulation assembly.
    • OEM Part Number: 12306-B1080. [1, 2]
  • Right Engine Mount & Rear Brackets:
    • Type: Transverse-engine structural frame brackets.
    • OEM Part Number (Rear Bracket No. 1): 12321-B1070. [1]
Material & Operational Characteristics
  • Vibration Absorption: The right-hand primary mount relies on a hydraulic fluid chamber. This fluid shifts inside internal orifices to counteract engine frequencies at idle, keeping the 3-cylinder (1KR-FE) inherently balanced engine noise out of the cabin. [1, 2]
  • Hardness Standard: The rubber components meet automotive Shore A hardness standards to deliver a balance between structural rigidity (preventing engine shift) and pliability (dampening shock).

Nissan Xtrail NT32 Engine Mountain

KSh8,000.00
System Configuration
The Nissan X-Trail NT32 utilizes a 4-point modular powertrain suspension layout designed to handle heavy torque transfer across the intelligent 4WD layout.
  • Front Mount: Controls initial lateral torque reaction.
  • Rear Mount (Torque Strut): Manages engine pitch, rollback, and longitudinal twist under hard acceleration.
  • Right Hand (RH) Mount: Primary engine weight-bearing component.
  • Left Hand (LH) Mount: Primary transmission/CVT housing support.
Material & Engineering Specifications
  • Isolator Type: Hybrid dampening configuration. The primary load-bearing engine mount (RH) utilizes a fluid-filled hydraulic core to cancel out high-frequency idle harmonics. The remaining mounts rely on high-density vulcanized rubber-to-metal bonding.
  • Housing Composition: Stamped high-tensile structural steel base brackets combined with lightweight die-cast aluminum upper brackets (RH side) for mass reduction.
  • Dampening Fluid Chemistry: High-viscosity ethylene glycol based compound sealed within dual pressure chambers (RH side only).
  • Average Component Weights:
    • RH Hydraulic Assembly: ~2.10 kg
    • LH Gearbox Assembly: ~1.85 kg
    • Rear Torque Link: ~0.95 kg
Genuine OEM Part Numbers & Cross-References
(Note: These apply specifically to the NT32 4WD platform paired with the MR20DD 2.0L engine or QR25DE 2.5L engine configurations)
  • Right Hand (RH) Engine Mount: 11210-4BA0A, 11210-4BU0A
  • Left Hand (LH) Transmission Mount: 11220-4BA0A
  • Rear Engine Torque Mount: 11360-4BA0A
  • Front Engine Mount: 11350-4BA0A
Platform Compatibility
  • Chassis Run: T32/NT32 Platform Series
  • Drivetrain Constraints: Tailored specifically for all-wheel-drive/four-wheel-drive layouts (NT32) to absorb additional transfer case and propeller shaft vibrations.

Mazda Demio Model 2015 Engine mountain

KSh8,000.00
System Architecture
The 2015 Mazda Demio uses a 3-point decoupled layout to suspend the compact SkyActiv powertrain configuration. This system distributes support across three crucial coordinate positions: [1, 2]
  • Right-Hand Side (RHS) Mount: Primary engine compartment weight-bearing isolator.
  • Left-Hand Side (LHS) Mount: Gearbox and transmission stabilizing bracket.
  • Rear Center Torque Mount: Lower structural pitch rod that controls longitudinal displacement during shifting and hard torque applications. [1, 2, 3, 4, 5]
Structural & Material Specifications
  • Insulation Core Technology: Uses a combination of natural solid rubber blocks molded between high-tensile steel mounting plates, alongside a fluid-filled hydraulic core on the primary load-bearing RHS node to maximize SkyActiv micro-vibration absorption. [1, 2]
  • Dampening Fluid Chemistry: High-viscosity ethylene glycol mixture configured inside internal pressure chambers (hydraulic variants) to prevent high-frequency idle harmonics from passing to the chassis rails. [1]
  • Housing Composition: Combination of die-cast structural aluminum alloys (for weight reduction) and heavy-gauge stamped steel base arms. [1, 2]
  • Average Component Weight:
    • RHS Hydraulic Assembly: ~1.20 kg
    • LHS Transmission Bracket: ~0.95 kg
    • Rear Lower Torque Link: ~0.72 kg [1, 2]
Genuine OEM Part Numbers & Cross-References
  • Left-Hand Side (LH / Transmission) Mount: D10G-39-070 (Universal configuration for JDM DJ3FS / DJ5FS chassis runs).
  • Right-Hand Side (RH / Engine) Mount: DA6V-39-060 / D10G-39-060.
  • Rear Lower Torque Mount: D651-39-040. [1, 2, 3, 4]
Platform Compatibility
  • Chassis Series: Mazda DJ Platform (Production lifespan 2014 – 2022).
  • Powertrain Application: Configured across the 1.3L P3-VPS petrol line, 1.5L P5-VPS petrol layout, and the 1.5L S5-DPTS SkyActiv-D clean diesel engine. [1, 2, 3, 4, 5]

Nissan Serena Engine Mount

KSh4,500.00
4-Piece System Configuration
The Nissan Serena utilizes a 4-point modular engine mounting network to secure the MR20DE engine and CVT powertrain layout. This configuration divides support across four distinct positions: [1, 2]
  • Right Hand (RH) Mount: Main engine support mount.
  • Left Hand (LH) Mount: Main gearbox/transmission support mount.
  • Rear Mount / Torque Strut: Manages longitudinal engine pitching under acceleration.
  • Front Mount / Pull-Down Rod: Stabilizes base structural vibration. [1]
Hardware & Material Specifications
  • Primary Bracket Composition: Die-cast structural steel or high-tensile reinforced aluminum brackets. [1, 2]
  • Isolator Type: Natural shock-reducing rubber matrix, with select primary load-bearing points using hydraulic (fluid-filled) dampening modes to maximize vibration mitigation. [1, 2]
  • Average System Component Weight:
    • Front torque link/mount: ~0.80 kg to 0.86 kg.
    • Left Front / Main Hydraulic Mounts: ~1.16 kg. [1, 2, 3]
Genuine OEM Part Numbers & Cross-References
3rd Generation (C25 Series) | 2005 – 2010 [1]
  • Front Mount (Pull-Down Rod): 11380-EN000, 11380-EN00A (Interchangeable with C26)
  • Rear Engine Mount: 11360-CY00A
  • Aftermarket Reference (Febest): NM-C25R (Rear), NM-C26 (Front) [1, 2, 3, 4]
4th Generation (C26 Series) | 2010 – 2016 [1]
  • Right Hand (RH) Engine Mount: 11210-1V30B
  • Left Hand (LH) Transmission Mount: 11220-1V30A
  • Rear Torque Mount: 11360-JD00A
  • Front Pull-Down Rod: 11380-EN00A
  • Aftermarket Reference (VAICO): V20-0480 (Hydraulic)

Honda Fit Engine Mount

KSh3,500.00
1. Honda Fit 3rd Generation (GK3 / GK5 Chassis: 2014–2020)
This generation utilizes a refined torque-rod setup to stabilize engine pitch under rapid acceleration and braking.
  • Right Side Mount (Engine / Timing Chain Side):
    • Design Architecture: Hydraulic / Liquid-Filled Mount with integrated aluminum frame housing.
    • Genuine OEM Part Numbers: 50822-T5R-A01, 50822-T5A-J01
    • Aftermarket Cross-References: Febest (HM-GKRH)
  • Left Side Mount (Transmission / Gearbox Side):
    • Design Architecture: Solid vulcanized natural rubber isolator bracket.
    • Genuine OEM Part Numbers: 50850-T5R-A01, 50850-T5A-911 (CVT specific variants)
    • Aftermarket Cross-References: Febest (HM-GKLH)
  • Rear Lower Mount (Torque Strut / Dog Bone):
    • Design Architecture: Hard rubber dual-bushing anti-torque link rod. Controls backward and forward engine block roll.
    • Genuine OEM Part Numbers: 50890-T5A-911, 50890-T5R-A01
    • Aftermarket Cross-References: Febest (HM-GKR)

2. Honda Fit 2nd Generation (GE6 / GE8 Chassis: 2008–2013)
One of the most common configurations in the market, relying heavily on a large fluid-filled upper right mount.
  • Right Side Mount (Engine / Timing Chain Side):
    • Design Architecture: Premium Hydraulic (Liquid-Filled) core inside a cast-iron/aluminum retaining collar.
    • Genuine OEM Part Numbers: 50822-TF0-J02, 50822-TG0-T02, 50822-TF0-305
    • Aftermarket Cross-References: RBI (O10208RE), Febest (HM-GERH)
  • Left Side Mount (Transmission Upper Mount):
    • Design Architecture: Solid natural rubber dampening cushion bracket assembly.
    • Genuine OEM Part Numbers: 50850-TF0-981, 50850-TF0-J11
    • Aftermarket Cross-References: RBI (O10408LH), Febest (HM-GELH)
  • Rear Lower Mount (Transmission Rear Rod):
    • Design Architecture: Structural rubber damper sleeve link.
    • Genuine OEM Part Numbers: 50890-TF0-911, 50890-TF0-981
    • Aftermarket Cross-References: RBI (O10508R), Febest (HM-GER)

Material & Metallurgical Composition (All Generations)
  • Rubber Polymer Matrix: High-tensile Natural Rubber (NR) blend calibrated to 60–65 Shore A durometer hardness to resist tearing under high shear torque.
  • Hydraulic Fluid Core: Internal chambers packed with low-viscosity glycol-based fluid designed to absorb low-frequency engine resonance at idle speeds.
  • Structural Brackets: Finished with an anti-corrosion black powder coat or zinc-galvanized plating to shield structural steel plates from humidity and rust.

Harrier 240 Engine Mountains

KSh4,000.00
1. Front Engine Mount (Radiator Side)
  • Design Architecture: Active Vacuum-Controlled Hydraulic Mount (Liquid-Filled)
  • Functional Mechanics: Features an internal fluid chamber connected to an engine vacuum line. The internal valve dynamically switches stiffness to dampen engine vibrations at idle speed and firms up under load.
  • Genuine OEM Part Numbers: 12361-28110, 12361-28220
  • Aftermarket Cross-References: RBI (T09A03F), Febest (TM-MCU30F)
2. Rear Engine Mount (Firewall Side)
  • Design Architecture: Heavy-Duty Hydraulic Mount (Liquid-Filled)
  • Functional Mechanics: A passive multi-chamber hydraulic isolator that counteracts structural engine block rotation and torque pullback during acceleration and braking.
  • Genuine OEM Part Numbers: 12371-28060, 12371-28240
  • Aftermarket Cross-References: RBI (T09A03R), Febest (TM-ACU30R)
3. Right Engine Mount (Timing Belt / Engine Pulley Side)
  • Design Architecture: Solid Vulcanized Natural Rubber with Integrated Aluminum Bracket
  • Functional Mechanics: Serves as the primary weight-bearing structural mount supporting the engine block to the inner body frame rail.
  • Genuine OEM Part Numbers: 12305-28120, 12305-28130, 12305-28230
  • Aftermarket Cross-References: RBI (T09A03RH), Febest (TM-ACU30RH)
4. Left Engine Mount (Gearbox / Transmission Side)
  • Design Architecture: Solid Rubber Core / Anchor Bracket Design
  • Functional Mechanics: Supports the weight of the automatic transaxle housing and manages horizontal transmission shift load shifts.
  • Genuine OEM Part Numbers: 12372-28020, 12372-28200
  • Aftermarket Cross-References: RBI (T09A03LH), Febest (TM-ACU30LH)
Material & Metallurgical Composition
  • Rubber Element: Premium Natural Rubber (NR) compound featuring a 55–65 Shore A durometer rating for balance between structural durability and resonance dampening.
  • Metal Casting: High-pressure die-cast aluminum alloy bracket bodies paired with stamped structural carbon steel base plates.
  • Surface Coating: All steel components are treated with a black anti-corrosion phosphate or electrophoresis layer to prevent moisture rust degradation.

Mazda CX5 Diesel Engine

KSh450,000.00
1. Engine Block & Core Architecture
  • Engine Code: SH-VPTS / SH-VPTR
  • Engine Type: SkyActiv-D, Water-cooled Inline 4-Cylinder, 16-Valve DOHC
  • Aspiration: Two-stage twin turbocharger (one small, one large turbo operating sequentially) with integrated intercooler
  • Displacement: 2,191 cc (2.2 Liters)
  • Bore x Stroke: 86.0 mm × 94.3 mm
  • Compression Ratio: 14.0:1 (Uniquely low for a diesel engine, reducing peak combustion temperatures and pressures to allow a lightweight aluminum block design)
  • Fuel System: Common-Rail Direct Injection with piezo-electric multi-hole injectors
2. Performance & Torque Outputs
  • Standard Output Variant (2012–2017 models):
    • Maximum Power: 150 PS / 175 PS (110 kW / 129 kW) @ 4,500 RPM
    • Maximum Torque: 380 Nm / 420 Nm @ 2,000 RPM
  • High-Output Upgraded Variant (2018–Present models):
    • Maximum Power: 184 PS / 200 PS (135 kW / 147 kW) @ 4,000 RPM
    • Maximum Torque: 450 Nm @ 2,000 RPM
  • Valvetrain: Chain-driven DOHC with VVL (Variable Valve Lift) on the exhaust side to facilitate internal exhaust gas recirculation for faster warm-ups and emission control.
3. Service Fluid & Maintenance Specifications
  • Recommended Engine Oil: SAE 0W-30 or SAE 5W-30 meeting ACEA C3 / JASO DL-1 specifications (Low-SAPS/Low-Ash oil is strictly mandatory to prevent clogging the Diesel Particulate Filter).
  • Engine Oil Capacity:
    • 5.6 Liters (with oil filter replacement)
    • 5.1 Liters (service refill without filter)
  • Coolant System Capacity: ~8.2 to 8.6 Liters (Mazda FL22 long-life coolant)
  • Emission Control Suite: Diesel Particulate Filter (DPF), Exhaust Gas Recirculation (EGR), and Selective Catalytic Reduction (SCR / AdBlue) on later European/global face-lift models.
  • Firing Order: 1 - 3 - 4 - 2

Noah Slim Engine

KSh110,000.00
1. 1.8L Hybrid Slim Engine (2ZR-FXE)
This powertrain powers the hybrid variants of the Toyota Noah (ZWR80 / ZWR90 series) and is optimized for low thermal loss and maximum space efficiency.
  • Engine Configuration: Inline 4-Cylinder, 16-Valve DOHC, Atkinson Cycle
  • Displacement: 1,798 cc (1.8 Liters)
  • Bore x Stroke: 80.5 mm × 88.3 mm
  • Compression Ratio: 13.0:1 (High-expansion ratio)
  • Valvetrain Integration: Dual VVT-i (Variable Valve Timing with intelligence)
  • Maximum Power (Engine Only): 99 PS (73 kW) @ 5,200 RPM
  • Maximum Torque (Engine Only): 142 Nm @ 4,000 RPM
  • Engine Architecture: Beltless engine block structure utilizing a fully electric water pump and electronic air conditioning compressor to save physical space.
2. 2.0L Valvematic Slim Engine (3ZR-FAE)
This engine powers the mainstream third-generation petrol variants (ZRR80 series) before the platform shifted to the Dynamic Force engines.
  • Engine Configuration: Inline 4-Cylinder, 16-Valve DOHC, Otto Cycle
  • Displacement: 1,986 cc (2.0 Liters)
  • Bore x Stroke: 80.5 mm × 97.6 mm
  • Compression Ratio: 10.0:1
  • Valvetrain Integration: Dual VVT-i with Valvematic technology (continuously variable valve lift mechanisms that reduce pumping loss and trim fuel intake requirements)
  • Maximum Power: 152 PS (112 kW) @ 6,100 RPM
  • Maximum Torque: 193 Nm @ 3,800 RPM
3. Maintenance & Fluid Specs
  • Recommended Engine Oil Weight: SAE 0W-20 (highly recommended for tight bearing tolerances) or SAE 5W-30
  • Oil Sump Capacity: 4.2 Liters (with oil filter replacement)
  • Spark Plug Specifications: Iridium-tipped long-reach spark plugs (e.g., DENSO SC20HR11 or equivalent)
  • Coolant System Capacity: ~5.8 to 6.3 Liters (Toyota Super Long Life Coolant)
  • Camshaft Drive: Maintenance-free, high-strength timing chain system
Showing 28 of 41 results
Please select your product
Product has been added to your cart
Compare (0)